An early preview of my YT video as it's unlisted at the moment https://youtu.be/hdxdQgk1Ozs

I think adding a motor is a great idea because as you say not everyone can grind by hand, forget injuries such as broken wrists or arms (or in my case a few years ago…elbow) just getting old and suffering from loss of grip or arthritis is common enough. What will be interesting is to see what quality the burrs are and how it compares with some of the established hand grinder manufacturers out there such as the Commandante or Zpresso to name just two. If all it takes to grind is as long as it takes to boil the kettle and it's still too long for anyone, then they must be a right miserable so and so.

@"Pompeyexile"#p45087 I've done a new video, Oh and my friend had had a broken wrist a year or so before trying my hand grinder and was having trouble. Enjoy https://youtu.be/h4CyR8HdSQ0

Forget wrist injuries, age, arthritis…when I'd grind big brews at work, or at family get-togethers, a kindly female might occasionally offer to take over grinding duty…it's something we might take for granted, but it's a big ask for a lady. For me, a motor for a Hario, or Porlex transforms grinding to a reasonable part of the process, rather than a total chore (for bigger doses). So, what's the anticipated price Dave? Hario Grind Stick is £80-£90 plus grinder (£110-£130 total), Timemore Go is £120-160. How does this fit in that landscape? By the way, you're not getting 310g out from 500g water poured (24g dose) …there's something amiss there?

> @"MWJB"#p45107 So, what’s the anticipated price Dave? Hario Grind Stick is £80-£90 plus grinder (£110-£130 total), Timemore Go is £120-160. How does this fit in that landscape? > > By the way, you’re not getting 310g out from 500g water pour That was before I'd finished the pour I think. I'm not totally sure of the price , the burrs I've found out are 38mm, and I believe it will be £99 all in, including a brush and blower. I think they just forgot to repack them when they sent it to me. The spindle has 2 decent bearings with tight tolerances. I like the little grinder going coarser tomorrow.

final video done… https://www.youtube.com/watch?v=XteiGQ0VLS4

I hear you say you have a JX Pro 1Zpresso hand grinder and I would be interested to hear your comments on a side by side comparison for tasting as the JX Pro at the moment is going for about £150-160 not including postage. Or would it be more comparible with the JX 1Zpresso which retails at just under £100. If so, same price and performance but with a motor would be a bargain.

> @"Pompeyexile"#p45131 Or would it be more comparible with the JX 1Zpresso which retails at just under £100. If so, same price and performance but with a motor would be a bargain. It's more comparable to the JX, the JX pro is a very capable grinder that can do espresso. This little grinder is surprisingly decent, hence me spending the time on what is a relatively inexpensive product. I'm more interested in decent products finding their way to consumers. If someone gave me this for my Birthday (V soon) or Christmas, I would not be disappointed, especially if I was just getting into coffee. If either of my student kids drank coffee, I would buy them this and a cheap pour over setup with no worries.

This really is the final video where I take it apart and other stuff. https://www.youtube.com/watch?v=4nEypFV1HHE

For me a decent hand grinder is the final piece in my affordable coffee jigsaw that I'm hoping Santa might bring me and I was looking at the 1Zpresso (not sure which variant yet) but this, if it comes with coated burrs seems a real bargain and I think will have to be on my shortlist.

> @"Pompeyexile"#p45252 if it comes with coated burrs seems a real bargain and I think will have to be on my shortlist. That's what they are saying about the burrs, it sounds like a really good package….Also they are considering a special offer for people who view my YouTube **(for which I don't get a penny and it won't be a paid referral link either)**, just a genuine special offer. How this would work I have no idea, as I've never done anything like it before, also they may decide not to do it as the price is pretty low as it is. I am assuming I get a special discount code to put in the description of the video?? **Hence, I would hang on from purchasing until I get more news**…**if I forget, check the video descriptions (probably check the last video first) before purchasing.** *P.S. I started using some really hard beans and so far it's done at least 5 X 24g, I can see the charge is getting lower as 2 blue lights show when grinding…I will be doing a 6th lot of 24g later. Even 5 grinds, I consider excellent for such a small motor unit..* *They are also considering having spare motor units available to previous purchasers at a discount, so when the lithium cell eventually dies, you can get another.*

The Unknown Hand/Electric grinder

Teaboy

DavecUK hi Dave that sounds better, I followed the arrows but there was never any comforting lock in. I hope that the new one can stand up to daily use. Thank you.

james65477564

Teaboy Mine did the same yesterday after 15months of use. I reckon it had about 2-3kg of coffee through it before the lugs sheared.

I can still ‘use’ it by holding the 2 parts together and I am astounded at how much torque is experienced - no wonder the lugs failed! Grinding with the handle seems far easier and less jerky presumably because of higher rpm when hand grinding.

PartySausage

james65477564 I’m surprised the lugs lasted that long, mine disintegrated in no time at all.
So with BB deciding the V2 wasn’t going to happen I set about losing myself in CAD for a couple of days to design and print a more robust grinder insert & motor housing, which I’ve been using for the last 6-months.
I can make the STL files available if you have the means to get them printed & want to give them a whirl

james65477564

That looks impressive. I assume you had to get them printed remotely in metal?

PartySausage

james65477564 They’re actually printed in PETG plastic so they can be printed on pretty much any FDM printer

james65477564

PartySausage Superb, I have a 3d printer so would love the files.

PartySausage

james65477564 Great stuff. Here you go https://drive.google.com/file/d/1-nZwtPILHJsSIgoVVM7Fu9hFgpDKOblJ/view?usp=sharing
You might need to play around with the orientation for printing as I didn’t get the orientation the right way round in the CAD S/W

I used a 0.4mm nozzle, 0.2mm Layer with 50% infill & 4 walls. Supports are needed so the lugs are printed correctly

james65477564

PartySausage Thanks for this, will take a look when i get home.

james65477564

The insert printed perfectly and I have only lost 1 lug on the motor housing so it is actually working again.

How did you remove the motor housing?

PartySausage

james65477564 Excellent 😊 Glad it worked for you.
The motor housing is held with 2 pozi screws, which screw through the housing into the top cap. Remove the sticker on the base of the housing & you’ll see the holes where the screws are fitted (The two conical towers on the pic) . Remove those & you can pull the housing & internals out.
The motor casing is actually two parts; The main cylinder, which slots into the keyways on the replacement housing & the top cap with the button press on.
The internals aren’t fixed & just sit in the recesses on the housing, you just have to make sure everything is orientated so the button & charging port line up with the top cap
Careful when you reassemble as the top cap is plastic & over tightening the screws could damage the fixings

james65477564

I use it almost daily and it is still working perfectly. I have the motor housing ready to go when additional lugs fail.

Thanks again for taking the time to design the replacement parts.

« Previous Page