IridiumBlackberry Hi all, I’m attempting to plumb in my Leva and I thought it would be as simple as connecting the pipe that came with the machine to an outlet on the bottom of the machine. However when tipping the machine upside down I can’t seem to find the outlet the corresponds with the ½ inch pipe that’s provided in the kit. Where would I connect this pipe on the machine? I couldn’t find how to do this in the manual. Thank you for your help.
IridiumBlackberry @DavecUK sorry to tag you in this, but I thought since you have a close connection to the product and Manual you might be able to help here.
DavecUK IridiumBlackberry As far as I am aware, it’s on the bottom near the rear. You will probably have to put it on it’s side to find it.
Cuprajake theres an adaptor, converts from half inch to sat ¼ then you have to go into settings and tell it that its plumbed in, it will just fill the res, the gear pump is still used
IridiumBlackberry Ah nice! I’ve found it! Thanks. @Cuprajake By the way do I need a pressure reducer? I noticed that the machine just feeds the water tank instead of direct.
DavecUK IridiumBlackberry By the way do I need a pressure reducer? I noticed that the machine just feeds the water tank instead of direct. No, you don’t, but I would advise a “water stop” on the mains side of the connection
