Hi Folks,
I have to a point in my espresso journey where I am considering an upgrade - to either a dual boiler (ECM Syncronika or ACS evo Leva) - but more on that in another thread.
so, right now, simple setup is a ECM/Rocket Giotto coupled with a Mazzer mini grinder (plus KINGrinder K6 for other coffee types and trying different beans without messing with the Mazzer too much)
So, whilst I predominantly drink long blacks or americanos with a touch of milk - I do have the occasional Flat white,
The rest of the family prefer milky drinks, hence the move to dual boiler
So, my machine is a originally an import from New Zealand (where it went by the name of Rocket Giotto, but essentially the same as ECM Giotto Classic)
I got from the original owner, who moved on to a ECM Syncronika
I got it about 2 years ago, during lockdown, and it has been in daily use since then. When received, it wasn’t working due to the gicar control box not working (so we thought) - so I basically restored from ground up and replaced all the usual maintenance parts (even if still working, simply because i had the machine open and wanted to completely refresh)
The only part I didn’t replace was the vibe pump, becuase I was struggling to get a replacement pump during lockdown - but hasn’t missed a beat!
Also, did the usual replacement of the group headgaskets (cafelat silicone), changed the shower screen and more recently added a group head thermometer to help with the temp surfing
I took a bunch of pictures during the build, as well a list of all parts replaced (and of course a box full os spares, as they were all working anyway)
also took off ALL the copper pipes and cleaned in citric acid and descaled the boiler
so, right now a daily driver
if i had to point to a couple of niggles:
- the vibe pump isn’t the quietest, but i have been told its absolutely normal
- I don’t use the water spout at all, but there is very slight leak - well not even a leak, the base is usually just damp, but i have never seen it actually dripping (i sure an easy fix)
- the machine is circa 2013, so obviousy a few rattles here and there - but I will tighten everthing up
so what do you guys think froma price point of view?