Pretty sure I can find the answer in this thread but there are 2951 posts…. Just curious if someone knows the price of the Evo Leva if buying direct from ACS? In Sweden there is only one seller and they charge almost 5000 euro and that is definately too much for me.

    €3000 to ship to the UK I believe

    Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -

    Tjyven Write to the factory and see if they will quote for a direct ship. Depending on the dealer agreement, or lack of, they may well give you a price.

    Contact me

      DavecUK Removing that elbow pipe from that tricky corner was almost an impossible task, which took me more than a hour to remove. The access and the permanent glue made it harder.

      I need to get a replacement elbow pipe. Local hardware don’t have them.

      Does anyone know what size is this and where you get them please ?

      Won’t put this back! 😭

          Cuprajake Thx Jake. Appreciate your help. It’s a shame it required a brute force resulting damaged elbow pipe.

          Which one of those two do you suggest ? Thx

            LMSC The fittings people are indicating are BSP tapered fittings, you need BSPP, male and female elbow fitting! Super difficult to find in the UK.

            Contact me

                dam!!

                Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -

                DavecUK Super difficult to find in the UK

                Oh no. Mine is no good. Can’t be used. 😨

                  Another one here

                  Edit

                  No! BSPT to BSPP

                  DavecUK BSP tapered fittings,

                  That’s BSPT

                  Then, BSPT for male and BSPP for female. Hence, BSPT male to BSPP female elbow should work, no?

                    LMSC none of those are BPS = BSPT, and the first one you linked to is BSPP male and BSPT female.

                    Both sides need to be BSPP. I did check my spares box this evening, but unfortunately I don’t have any of those elbows at all. My recommendation would be, Make up a small list of spare parts you would like (seals, gaskets, temp sensors, etc.. contact Maria at ACS tomorrow and get her to put a kit together.

                    If it’s small and light Paolos nephew is coming to stay with me for a while, he arrives 21 Feb, he might be able to bring them with him and I can post them to you.

                    In the interim, you can use the machine as long as you don’t turn on the steam!.

                    There is this:

                    https://espresso-solutions.co.uk/modbar-fitting-elbow-1-8-bspp-male-x-female/

                    or this, which doesn’t look tapered in the photo, so you could ask them.

                    P.S. I am just guessing they are BSPP fittings on the machine and not metric. I’m also assuming they are not tapered? I just confirmed with Italy this evening, they are BSPP.

                    Contact me

                        DavecUK or this, which doesn’t look tapered in the photo, so you could ask them.

                        This link is missing Dave!

                        Thank you so much for your thoughtful gesture Dave. Let me compile a list after talking to her.

                          Good polish and clean after the man handling she’s had 😂

                          Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -

                            LMSC No it’s quarter inch and they don’t measure as ¼ inch, that’s just what they are called….It’s mad, but ¼ inch doesn’t refer to the diameter.

                            Contact me

                                DavecUK There are a few things I will never understand!

                                What are your recommendations to get a list of spares?

                                Getting them thru’ Paolo’s niece is a lovely option. I am happy to do a short drive to collect from you or you could drop in one of the days, when we are mutually free, to pull a few shots from Evo using your roasted beans. A lovely chance to see you making some heavenly cups on Evo that too beans from your roaster. 😁

                                    Cuprajake Good polish

                                    Did you really chrome polish? Which one please? Thx