Osmio leak- is it catching ?

Elcarajillo

Ran a sterilising treatment through the Osmio last night, all went well until running the fresh water flushes-
(flushing filters still in) Draw a litre through -all OK. pull another litre- water running out through base.
Removed tank, mopped / dried up. Try again, draw 1 lit, start to draw next litre- leaking underneath.
Not from filters or rear tank ?? any thoughts, before I dismantle it ?

JahLaza

Elcarajillo yip, has happened me. It’s not detailed enough in the instructions, but, what you need to do (and take a note for next time as it will happen again if not!) is either empty the sanitising filters in between each flush or add less water than instructed each time - equivalent to the volume of the two large blank filters.

Elcarajillo

JahLaza Many thanks🤙

DavecUK

I suspect the internal tank overflowed

Systemic

DavecUK I suspect the internal tank overflowed

Yep. Same thing happened to me when I was sterilising mine.

Elcarajillo

I am sure this is the problem, but why has it not done it before doing this procedure.
I followed @JahLaza note /reply and is now back to normal.

dfk41

Why would the internal tank overfill?

DavecUK

dfk41 With an empty cartridge set, the internal tank fills super fast.

dfk41

DavecUK Ah, well, that rules out my issue nicely!