Cuprajake Nah, As much as id love to have an evo again I know how awkward that could be to replace, when i went in to do the elbow, and if you need to remove more pipes if they are on with the same thread lock then good luck 😂😂😂
dfk41 Cuprajake I have instructions from others who have done it with no need to remove the boilers….as supplied to me by @Adrianmsmith …….one down one to go!
dfk41 LMSC Not according to the instructions I have. We took the top, right side and back panels off. Removed the weights then undid the bolts holding all the power stuff together allowing them to move and access was quite reasonable. The second time Jason did this on Saturday, start to finish was about 40 minutes and that was within the confines of working in my limited space
Adrianmsmith dfk41 Imho the “issue” could be resolved by adjusting the screen sensitivity . Each quadrant has individual adjustment and making less sensitive could be all that’s required , although theres no guarantee to this
dfk41 Adrianmsmith If I was able to, that would be my first port of call as well. We know it is not a vibration issue making the board come loose (because we have tightened it). I would have thought a fault on the display screen would more likely be permanent rather than intermittent. I just wish I was more handy with the spanners!
Jason1wood Obviously when I get it and have a tinker, and problem gets solved, will be throwing more cash to David as its a shame to sell it as know how much he rates the Leva
dfk41 Jason1wood I knew it was too cheap…..LOL If Jason does as he suggests, I will chase him with a flea in his ear!
Jason1wood I’ll defo be picking all the leva owners brains on here. Off to watch every YouTube video now haha
