So there's a lot of people buying Minimas on here at the moment and a few experienced users so I thought a thread dedicated to the Minima with questions / information on the machine would be useful to myself and the others who have recently purchased and are about to take the plunge (and to prevent myself from hijacking other people's threads). One question I have to kick us off is about the brew boiler and PID. For some reason my Minima does not seem to like bring set at 93 degrees. Despite me having it set at 93, the display shows it settling at 94. I'm not sure if this is indicative of an issue or standard behaviour. It occasionally will drop to 93 but then goes up to 94 again

Edit…I've just found the PID Values Explained section at the back of the manual where it explains this is normal.

Mine does the same and I confirmed with other Minima users when I bought the machine.

> @"dutchy101"#p6482 Edit…I’ve just found the PID Values Explained section atvthe back of the manual where it explains this is normal. Very good manual that one…, online version available as well. https://sway.office.com/xofz72xFBgYyiWqi?ref=Link

@"dutchy101"#56 @"HVL87"#57 How have you found the stock filter baskets? I'm already thinking of upgrading, but won't do unecessarily quickly - although that is also partly tamper dependent.

@"PortafilterProcrastinator"#p6679 they are fine. Easier to pull a nice looking bottomless shot - in my opinion that doesn’t mean much. I moved on to a 18g VST to optimise my shots as much as possible.

It's been a bit of a transition for me this week as I've changed from Sage 54mm baskets and didn't have a 58mm tamper until a few days after the machine arrived. I got a new distributor yesterday which has also helped so still finding my feet a bit with the stock baskets, but pretty happy with them so far

Thanks both, if they're a similar ID then I can get a tamper (thinking bravo ATM) first and upgrade the basket later when looking for refinement, rather than just trying to make something palatable!

Yeah - I've got a Nomcore 58.5mm tamper on order and coming this week so will get a better handle on things once that has arrived

@"dutchy101"#p6686 I'd be really interested and grateful to hear how you get on. How are you finding the Minima overall?

Absolutely loving it - so glad I went with it I'm really enjoying using it. How about you? Made my wife a tea using water from the service boiler to drain some water this morning and she commented how much better it looked and tasted (using the zero and remineralised water I've been making up).

The General ACS Minima Thread

Evgenibgr

dutchy101

I also use Coffe Sensor flow control. I have tried various pre-infusion variants with no positive taste results. It is currently standing at 360 degrees. And the results in the cup are excellent. Raises 7-8bar in 8-9 seconds.

Abstracted

Evgenibgr

Are you saying that you’ve found flow control doesn’t improve taste results?

If so, what roasts have you tested?

Evgenibgr

These are the last three coffees I have used. They are City Roast and are 2 to 4 weeks after roasting. Flow control is half open. I may reduce it a bit during extraction. But my experience with pre-infusion has not been successful. The coffee becomes very dense in taste and the aroma is lost.

jglez3

Hi!

I bought a second hand Minima a few days ago and apparently it’s leaking on the back (internal part) of the steam wand. It starts leaking when I turn the service boiler on.

I think it has an easy solution: PTFE.

But the thing is… do I have to tear the Minima apart to be able to access that part? Take the service boiler out?

Green where it leaks, red where it connects.

Thanks.

DavecUK

jglez3 You will have to remove the brew boiler to reach it…you may be able to undo the copper pipes to the brew boiler and then ease it out of the way once you loosen the mounts..

It’s the only way you will access the back of the valve. and support the fitting while you loosen it.

Cuprajake

ahhh the good old steam wand leak, @DavecUK

jglez3

Thanks! I will have a look at it tomorrow or the day after.

I was hopping to not have to remove the service boiler but… it is what it is. At least there’s not too much wiring around this one.

Abstracted

Any plans for the Minima to have a no-burn steam wand?

DavecUK

Abstracted Any plans for the Minima to have a no-burn steam wand?

That would be a no…

Abstracted

@DavecUK After asking, I realized that I don’t want anything to do with Teflon 😬 Maria did say that they currently have no-burn wands, but I’ll assume she’s mistaken or there’s a loss in translation.

Anyway, I’m placing an order with her right now…

Do the knobs have square inserts? If so, are they 6mm or 7mm?

And what is the thread size of the portafilter bolt? And what is the portafilter bolt hole depth?

Cuprajake

id buy a complete pf, half of them are locktite in

Abstracted

Cuprajake Thanks, I’ll request one that hasn’t been glued.

jglez3

Hi again,

So… I tried to access to the steam wand valve and it’s impossible to get that out.

I have the service boiler out of the way (there’e just one wire on the bottom that I can unplug if necessary), but I don’t know what to do to get that fitting out of there to add some PTFE.

@DavecUK any tips?

Thanks!

Abcan

I’d say hold the nut at the red arrow and turn using a spanner on the flat on the elbow fitting at the yellow arrow.

Cuprajake

they are super tight, you dont need to hold the nut, just the elbow, its permanent lock tite. you need something that is tight on the fixing or you will damage it, and its a specific acs/italian fitting not available in the uk. use a long spanner, you need leverage, if/once off clean all the threads apply 6-8 or so wraps of ptfe tape and re assemble

DavecUK

As jake said, be very careful with the elbow. As Jake said, be very careful with the elbow. Unless the spanner fits the flats perfectly, you will damage it.

jglez3

Ok… seems like its slowly moving now. Jeez, these italians make things difficult.

Thanks for the tips!

I had to hold like hell the nut on the external part of the steam wand or when trying to unscrew everything was turning around.

jglez3

Finally!! Elbow out, nut out, steam wand out.

There’s a little bit of scale in that elbow 🤯

Now it’s time to clean it up completely, add some PTFE and get everything in place again.

Thank you so much for all the tips, you can’t imagine how much I appreciate it.

DavecUK

jglez3 I went bananas in the factory about permanent threadlock 8 months ago. They should no longer be using it on prosumer machines and are using lorxeal 18 -10 which is expensive, or loctite 542 med strength.

I remind them of it every visit including this one. I also had them move to a food safe silicone lubricant of superior quality 90 euro per Kg (trade price). As you can imagine I’m super popular. Especially as I moaned about something else on the lever slow release system and had all the machines changed. Went down like a lead balloon with Paolo, but the workers building the machines were 100% behind me and just got on with it. Of course if anything goes wrong at the exhibition Paolo will be waiting to pounce. 😉

Abcan

DavecUK at least they listen to your advice. It’s one of the reasons I went for the Minima as they seem to keep developing it where they could just leave it make more money.

P.S thanks for nagging them! 😂

« Previous Page Next Page »