Might be good to get this one going again for all the new members.

@"Lake_M"#p204 So glad to have you guys on board, it's like having additional memory to revive my failing one. I'll bet there are a lot of favourite threads I have forgotten to add…I suppose I was busy doing the structural stuff like setting it all up, the add ons, the forum areas, images etc..

This is my current setup. Nothing too flashy at the moment because I've just moved house. I use the Baratza Encore with my Aeropress and the Specialita is for the Europiccola. I'm not really into milk drinks so it's black coffee, Americano and espresso for me. My partner is a tea drinker. [upl-image-preview url=//i.imgur.com/732cEUK.jpeg]

![](blob:https://coffeetime.freeflarum.com/dcf84484-c16f-45e8-a7c3-34804ce9cc81)

[upl-image-preview url=//i.imgur.com/SsJrbWk.jpeg] My selection of gear at the moment: Bezzera BZ10 Compak K3 Touch grinder Cafelat Robot Kinu M47 manual grinder Fiorenzato F64Evo grinder The F64Evo is a speed demon that grinds 17 grams in some 4.5 to 5 seconds. I like it a lot, but it seems to produce a fair amount of fines. At the end of every shot, with the brew pressure being released, some fines seem to slip through the shower screen and eventually plug up the pulse line to the brew pressure gauge. This didn't happen with other grinders I had used (K3, Macap M2) I recently had the machine serviced and the pressure gauge "unplugged" and for now I resorted to my K3, which I hadn't sold yet. The Kinu provides the highest level of flavor clarity, but I tend to use it mostly on vacations with the Robot. Boy, are they a pair 😄 !

![](https://i.imgur.com/f6ssKLn.jpg "Pure") Not that great with taking photos but here is my current setup which I am very happy with. Espresso Machine: ECM Puristika Current Portafilter: ECM Bottomless Gran Crema Grinder: Niche Zero (for espresso) Grinder: Wilfa Svart (for Aeropress) Favourite Bean At The Moment: Artisan Whisky Thief (very boozy, delicious espresso, not that great with the Aeropress in my opinion) Things To Get: A better scale, a distribution tool and a tamping station Really getting along nicely with the Puristika. A bit of a learning curve initially as it is my first espresso machine, but lately I am enjoying the results and learning a lot with fine tuning my tamping with the bottomless portafiler. The Niche Zero is also performing very well (far more consistent grinds than my previous grinder) and dialling in has been fairly straight forward.

@"Beverast"#p717 A big favour if you can…**are you able to scan the relevant pages of the user guide… for PID usage and options.** All the other stuff about portafilters and pressures I don't need, although **it would be useful to see the warnings about use of the right hand knob.** I have not used my Puristika for well over 1 year. I had the PID settings right, but of course never had a manual and can't remember how to operate the PID. I don't accidentally want to lose what I found were ideal settings. I did do some modifications on mine and might share the PID settings if people are interested. *P.S. You could even photograph them*

@"DavecUK"#p718 Hi the user manual for the Puristika can be found here: [Puristika](https://www.ecm.de/fileadmin/manual/BA_ECM_Puristika_09-2021.pdf) It's in German and English and is exactly the same as the physical manual I received with the machine.

Thanks for the tip 🙂 Mine my be a little different as it's a prototype produced in 2019. However, I am sure my settings and probably the modification I made is still relevant.

A couple of Ceado grinders; the big E92 conical for single dosing fitted with a ‘blow up’ bellows, the E37s for churning out my ‘house’ bean. A Pulman Big Step tamper, which is being used with a 20g ridgeless VST. Made a huge improvement to my prep game. The GS3 replaced a La Spaziale mini Vivaldi which was a great little dual boiler, but did suffer a little from temperature stability issues. [URL=https://i.imgur.com/jyWNpRW.jpg][IMG]https://i.imgur.com/jyWNpRW.jpg[/IMG][/URL]

Show us your setup!

Evergreen88

Hello everybody, just moved from the old forum. Here is my setup:

I got the Classika a month ago from BB

LMSC

Evergreen88 Welcome to the forum! Nice set up.

DavecUK

Evergreen88 Nice and welcome to the “new” forum with all the old people. 😉

Giphy - Donald Trump What GIF by Jeff Dunham

Amberale

Is it going over the top to plumb a Faema Baby?🤔

The Bianca’s LCC/brain failed and she is off being repaired under warranty

ronsil

Thought you might like to see my latest coffee cart setup.
It’s all controlled via a keyboard now with a separate trolley to heat cups underneath.

DavecUK

ronsil Love it, neat and hi tech. An example to us all.

MediumRoastSteam

ronsil It’s all controlled via a keyboard now

I see the keyboard at the back. You play music to it and it makes you coffee. Nice! 😉👍

Very nice setup Ronsil, enjoy!

Waitforme

Wow @ronsil , that is a techy set up you have.

Nice 👍

DavecUK

Waitforme I bet you would never guess his age…perhaps @ronsil will divulge.

Pompeyexile

Blimey! Coffee making in the 21st Century….Does it give you the weather forecast, latest world news and let you know who is at the door when the door bell rings too :)

tompoland

Decent, EG-1, Streitman CT2, Izzo Valexia. Bliss.

DavecUK

tompoland That’s a seriously impressive setup Tom!

drdre89

Looking back at the posts in this thread … I think tompoland has one of the most impressive setups 🤠☕☕☕😎 . That grinder alone

Cuprajake

Mine

DavecUK

Cuprajake Another neat and impressive setup….Makes me realise how messy I am.

MediumRoastSteam

That’s mine:

Doram

MediumRoastSteam Christo wouldn’t have done better!

MediumRoastSteam

I mean…

John_Yossarian

MediumRoastSteam With the 🙂kimono off

MediumRoastSteam

Doram Christo wouldn’t have done better!

It’s a miracle! 😂😂😂👍😊

siliconslave

the shiney

Lake_M

Very neat and very shiny!

DavecUK

Lake_M Very neat and very shiny!

Agreed, coffee people seem to be very tidy, neat and clean.

« Previous Page Next Page »