Welcome to Coffeetime. Please introduce yourself and tell us about your coffee journey too.

I'm a long-term drinker of filter coffee that's relatively recently moved into expresso, or more accurately, espresso-based drinks, and this seemed like a good place to chat and learn.

Welcome to our fledgling forum. You will find a wealth of knowledge available here.

I'm a jaded user of another forum, that needed a change 😆

Up until recently I was only marginally aware that there were people on the internet who chatted about coffee stuff all the time. I'm now over two and a half grand down and it's all your fault. 😅

@"dfk41"#4 grabbed me by neck and brought me here! 😂 Thx guys! Feel at home!

I'm not saying I'm paranoid or anything, but a few weeks ago I walked into a coffee forum, pulled up a chair and sat down; everyone else seemed to get up and walk out! 😆 My coffee journey started over 40 years ago when my wife bought me a Gran Gaggia for Christmas. That was before the internet was invented, so there was no information freely available about the need for a grinder. I made a mess and a lot of terrible coffee. I got into stove top coffee makers through a Romanian student I befriended, we drank a lot of good coffee together before he moved on. My wife decided we should buy an induction hob, so that put an end to my stove top coffee making and I switched to french press. After breaking the glass of my favourite press I decided to try one of those gimmicky Aeropress thingies; that was a real eye-opener for me and started to buy speciality coffee beans and a Baratza Encore. A couple of years ago I retired and started volunteering in a charity shop where I saw a La Pavoni Europiccola. Nobody seemed to know what it was, so I got it at a very agreeable price. I invested in a Eureka Mignon Specialita to feed the LP and have become obsessed with the coffee making process.

@"LMSC"#p138 It is our home now….

On the other forum too(BadBoyR), don't participate much, just been busy reading posts/reviews on a new dual boiler machine. Currently have a bean to cup, but would like a more manual machine, mainly drinking milky coffees or a small shot if doing some cardio fasted. Looking at the sage dual boiler, lelit elizabeth and ACS minima.....so undecided, but want to future proof myself for being able to control flow later as gain better experience.

Got funny looks when I first got my aeropress, bringing it to work etc. decided to try make better coffee about a year ago, started the research. My girlfriend complained(?!) she didn’t see me for a few weeks as I was stuck online researching this thing. Stumbled across this gang (in their/your former space), which made it so much easier to confidently choose an espresso machine and then help when it arrived not working correctly!! Thanks to all again and Dave your stated principles of this forum are so great in these times, must be applauded, cheers for such dedication. It would have been a much much more difficult journey to getting it half right without the help of you guys

Was on “the other coffee forum”, but thought I’d hop over and join you all here. I’ve liked coffee for a long time, with a progression through french press, moka pot, aeropress and Nespresso. I’ve now settled on v60 for filter and since Dec last year I’ve started making real espresso with a Rancilio Silvia coupled with a Niche Zero. I enjoy tinkering, so I fitted a PID almost straight away, and for Christmas I’ve got an Ito board coming so that I can play with pressure profiling (a bit like a decent on the cheap). While a single boiler might not be for everyone, I’m the only person in the house who drinks coffee, so it’s perfect for one. Easy to maintain and less energy use as I’m only heating one small boiler. It’s a bit slow when we have guests, but I can live with that.

New Members Introduce Yourself

MediumRoastSteam

Amberale Dave, are you still collecting data on machine faults/failures

I see a new thread/tag coming…. 😉👍

DavecUK

Amberale Dave, are you still collecting data on machine faults/failures?

No, I no longer read or post on CFUK, I keep getting moderator e-mail messages about spam that needs dealing with. Which shows whoever the admin is has never ever replied to my pm…if he could be bothered to reply, he might realise none of the mods are there any more..

MWJB

Hi everyone,

Got the ‘heads up’ about the new forum, so here I am.

Predominantly making drip brewed coffee. Looking forward to getting stuck in.

LMSC

MWJB Welcome to the forum Mark. Fantastic you came on board.

I was chatting with Dave the other day and was hoping you will find your way here.

Here you are! We need coffee experts like you to guide this community. 😊

DavecUK

MWJB Hi Mark, good to see you….

Abdulaziz

Hello everyone

This Abdulaziz from Saudi Arabia “ you can call me aziz i know my name could be a bit hard for some”

I have a decent experience compared to some of you guys but i will share my experiences

Machines:

nuova simonelli oscar 2 (3 months didn’t work for me)
lelit bianca v2 ( 1 yr & sold to make room for #3)
ACS evo leva ( schedule to be shipped this week)

Grinders

Baratza encor for drip ( 7 yrs then retired)
breville smart grinder pro for drip ( 1 month)
Eureka crono ( 2 weeks)
Niche ( 5 months)
Eureka Atom 75 ( 9 months, was a fantastic grinder)
1zpresso K-plus
Fellow ode for drip ( with mazzer super jolly burrs)
Kafatek MC4

Through my journey i loved to explore my gears, all of my machines/ grinders have suffered from my curiosity and tools. Yes i am the kind of guy who likes to break things and fix them again then enjoy the achievement 😅

LMSC

Abdulaziz Welcome to the forum and ACS family. Interesting journey Abdul.

DavecUK

Abdulaziz Hi Aziz, welcome to the forum…look forward to hearing more about how you get on and any photos/videos of your setup in action.

Lake_M

ScrapyardKing

Glad to be of service. It’s nice being able to help fellow coffee lovers, and keep perfectly good grinders out of land-fill. I wonder if I can cut and paste my fixing guide from over there to here - is this allowed DavecUK ??

DavecUK

Lake_M I wonder if I can cut and paste my fixing guide from over there to here - is this allowed

Of course..

coffeeb

Joined here (bcoffee over there), the old place was a huge help figuring out things.

Currently running a Mara X & Niche (we’re all individuals! 😉)

LMSC

coffeeb Welcome to the forum. Nice to see you here.

DavecUK

coffeeb Welcome to the forum.

DavecUK

Surprised we have not seen Ratty?

Baldrick

DavecUK I believe he has only very recently, within the last few hours, been made aware of the move.

MediumRoastSteam

DavecUK - I chatted to a ratty this afternoon. I hope we’ll see him soon.

Msmk0

Hi all, I am from Barcelona (not Manuel, sorry 😅 ), and a proud owner of an Acs Vesuvius Evo Leva since August.

Came here following my fellow Evo owners colleagues to continue the discovery and learning trip we are having together.

LMSC

Msmk0 Welcome to the forum and the ACS family.

DavecUK

Msmk0 welcome to the forum, glad you found us.

Merlinmoggy

Hi Guys, good to be here and I’m sure I’ll pick up lots of friendly advice as my fledgling coffee journey continues. Not much to shout about so far but took a fairly tried and tested route out of a well used Sage DTP and Delonghi grinder into a Mara X and Eureka Specialita about 6 months ago and love the machines. Am yet to fully master the art of milk texturing despite hundreds of attempts and various jugs but enjoy the trials. Next steps for me are probably a bottomless portafilter and brew head temp gauge, and perhaps head towards flow control at somepoint. As others have said but I’ll add my penneth, thanks largely to Dave C for advice which has pushed me this far without any regrets to date.

LMSC

Merlinmoggy

hellojava

Welcome to the forum ! Some great choices there!

DavecUK

hellojava Merlinmoggy Welcome to the forum….

« Previous Page Next Page »