lancehedrick LMSC I often record myself doing tasting for 2-3 hours at a time and post links in my patreon haha! I am very obsessive with taste, as I have had the privilege of calibrating with people from all over the world. I have 48 cupping bowls at home that get used probably too much for my health ha! But yes- I should probably add a bit more in there. In my mind, if people are following me and watching my videos, there is an implicit trust. So, I tend to rely on that I think a bit too much. Comments here are really helping me see that! haha
CoyoteOldMan DavecUK I’ve met Lance (didn’t ask for his autograph or a selfie with him) What? And no piggyback ride either? DavecUK I do very little that encourages those completely new to coffee to find out more Perhaps not with a big voice, but I personally think you do a lot in that respect, starting from setting up this forum.
darkstefano Hello, sorry I didn’t want to open a new topic. I have a Guatemala beans but the beans are big for the hole above the burrn and the niche struggle to drag and grind it. You have any suggestion? How I can grind homogeneous it? Thanks all, I hope to have esplained me.
Inspector darkstefano If you have a dremel shave it yourself, if not, https://coffeetime.freeflarum.com/d/1281-anyone-wants-four-3d-printed-nz-control-disks-w-larger-notch
DavecUK darkstefano You either have a very small (which finger is it), or that’s a very large bean. Is it a Maragogype? P.S. Be better next to a ruler marled in cm and mm
dfk41 darkstefano As far as I am aware, the FFC simply controls the flow of beans into the burrs. The original grinders did not have these fitted, so that I am sure that ought to solve your problem!
DavecUK darkstefano I tried the biggest Maragogype I had (it was pretty big) when I came up with the NFC idea, it worked fine. Yours is perhaps slightly larger but it won’t be by much?
darkstefano I don’t know, now i removed the top disk distributor and now it’s little better, but i m not happy with this coffee bag. Ugh! Enjoy
delta76 Finally having my first Niche. it’s used but in very good condition, and I’m impressed. The hype of single dosing is true. however, one major drawback is the static - it’s everywhere. With my eureka, almost no static. Was RDT a remedy, or it’s advised against ?
dfk41 It might be atmospheric ie the central heating is starting to be used and it might be the beans. Sometimes it happens to me as well but I doubt it is the grinder itself