ACS Vesuvius Evo Leva

CoyoteOldMan

BBritton Good for you, is all I can say. I’m wondering if by any chance the higher UK voltage (effectively 240-245, even if nominally 230 like the rest of Europe) has anything to do with it…

Amberale

MediumRoastSteam
My reasoning for the VG1 goes like this.
I know that structurally it doesn’t matter but the flex in the EVO has always annoyed me.
The noise of the gear pump is grating and hopefully the rotary pump will be better.
Aesthetically, the group seems too big on the EVO its proportions look better on the VG1.
The extra width means the Praying Mantis wands don’t get in the way.
I am getting crossed info about whether one can bypass the water tank.
The auto stop function sounds good, I don’t mind a cleaning regime and don’t faff around with a tupper ware container.
The only downers for me is I have to rebuild my coffee sideboard as it is only 460mm deep and the area under the drip tray looks incomplete.
Hopefully the new drip tray design finishes it off a bit better or, even better a knock box/drawer is fitted.

CoyoteOldMan

Amberale whether one can bypass the water tank

There are people who have bypassed it on the Evo, so I don’t see why not. However, if you did that, you’d lose the adjustable pre-infusion pressure (or at least have it far more limited, depending on how the pressure regulation is done).

Cuprajake

Do people play with their infusion pressure?

I’ve moved it but gone back to 2bar

CoyoteOldMan

Cuprajake Not touched it from factory in 6 months - but then I find that I have more than enough parameters to play with between temperatures, grind, dose and ratio.

Sometimes, when grinding coffees that go so fine that I get grinder stall or lumpiness, I wish I could decrease the pre-infusion pressure easily, as that may help. However, even in those cases I have seldom needed to throw away shots (which may well be a sign of a non-discriminating palate…).

LMSC

Cuprajake Do people play with their infusion pressure?

I did try 2.5-3.0. Didn’t like the taste. Gone back to 2.0.

We can’t plumb the machine either - location and even if we move it, will not drill the expensive granite kitchen top!

Cuprajake

My only thing with having a mains fed system is:

Water quality

Filter cost

Leak issue/leak detection

CoyoteOldMan

Cuprajake I’d add (at least in my case) flexibility of location. My machine is on a trolley in the opposite corner of the kitchen to the sink. It was the only place where it could have gone without massive disruption, and plumbing in would have been messy in any case (granite top).

boshk

what are you guys using for Tamper and basket?
The stock acs accessories are:

-double shot=H32 and holds 18/20g

-tamper is 53mm?

anyone confirm?

LMSC

boshk

IMS 26 is widely used. We load 17 max at our place, while some go up to 18g. The IMS 32 is too big, you want 20g-22g.

We have the 54.4mm convex Torr and 54.9 mm Bravo.

CoyoteOldMan

boshk The stock acs accessories are

1 single (conical), 2 double (32 mm) baskets. Irritatingly, slightly smaller diameter than the IMS.
Naked, single and double spouted portafilters
Tamper 53.7 mm (with same wood as other accessories, so it looks very nice, but it’s too small)
2 and 3 hole steam tips
Plumbing kit
Spare o-rings, gaskets and bits’n’bobs

boshk

LMSC

Do you mean ACS supply the machine with IMS 26 basket? I thought the stock wasn’t IMS.

Thanks to the tamper, will look into it.

LMSC

boshk ACS supply the machine with IMS 26 basket?

No!

https://www.theespressoshop.co.uk/Mobile/en/IMS-San-Marco-Competition-Double-Filter-Basket-1218g---B662TH26M/m-m-2003.aspx

Cuprajake

CoyoteOldMan and towel

Systemic

Does anyone know current price of the Evo? Will be listing one of my two Evo’s shortly - my son’s. We’re in the process of pooling households so will only need one. Would like it to go to a forum member of at all possible.

CoyoteOldMan

Systemic €3000 + transport and taxes for the all steel and black plastic version in June 2022; it may go up on a brand new machine given new features.

Systemic

Thanks. So VAT on top of the €3000 and delivery.

DavecUK

Plus inflation and parts prices have gone up…so really prices now may be very different from June 22.

boshk

Curious…. What do you do on Evo or lever machines in general (exception 1grp vostok) if you mess up the grind and go too fine on a new batch of beans and basically plug the basket and nothing comes out??

I have a ‘standard’ machine and if I mess up, I can stop the shot, the pressure and water gets deflected into Drip tray.

With the Evo, there’s no valve to deflect the pressure and water…. What do u do?

Let it cool down, wrap grouphead in towel and release the portafilter???

CoyoteOldMan

boshk What do u do?

Wait. With 11 bar, it will drip through in a few minutes. If you can’t wait, as you said: towel and pray.

DavecUK

boshk What do u do?

Let it cool down, wrap grouphead in towel and release the portafilter???

You have a pressure gauge on the Evo group…pull on the lever until the pressure reads zero, then unlock the portafilter whilst holding the pressure at zero…no drama, no fuss….Then gently let the lever up.

« Previous Page Next Page »