Has anyone used one of these? If so, does it significantly reduce static as claimed? Trying to get an unbiased take rather than from YouTube etc.

I’m still looking for a small brew grinder to replace the C40. I had an Ode v1 for about a week and loved the size/design and actually really enjoyed the coffee I had using it. However, it was messy. Like very very messy. Grounds everywhere. So much so I returned it.

With v2, they’ve upgraded the burrs and apparently added an in-chute ‘ioniser’ to neutralise static without having to faff around with RDT etc.

This is a big claim, and the cynic in me is thinking snake oil. But if it does reduce static to a level I’d expect from a flat burr grinding for brew, then I’d be very tempted to buy one as it ticks the other boxes for me.

Is the C40 not performing then - or is handgrinding becoming a pain ?

    MattH

    It’s definitely a performer. Hand grinding at filter settings is pretty easy going.

    It was only ever really intended to serve as an interim solution while I find an electric brew grinder that fits the bill (very compact, flat burr, nice design).

    I also prefer flat burr grinders in the cup.

      I have one on pre-order from coffee hit when it first released, won’t arrive until valentine’s day now so it has been a few months. I don’t think there will be many in the UK yet

      Coffee Roaster. Home: Sage Dual Boiler, Niche Zero, Ode v2 (SSP), 1zpresso ZP6 Work: Eagle One Prima EXP, mahlkonig e80s, Mazzer Philos and lots more

        I know you said you can’t be bothered with RDT but honestly it made such a difference with the v1, virtually no mess and so much cleaner than say DF64 with RDT and chute mods. I get the sense its pretty much unavoidable on many single dosing flats unfortunately.

          FadedFrontiers

          You’re right about static on flats. My Dad has an x54 and it’s the same at brew settings, coffee all over the place.

          Is there a risk of rusting the burrs? I’ve never used RDT as a method on any grinder so not sure.

          It is tempting to try the v1 again as it’s almost £100 cheaper and I have a new set of 64mm burrs that I bought for the SJ and never used.

              InfamousTuba

              Yeah seems that way! I was going to wait for Amazon to get some for the ease of return if it still has a static problem.

                Ernie1 Fellow and others recommend it, some manufacturers even provide a little bottle like this: https://www.baldwins.co.uk/alpha-amber-glass-bottles-with-spray-atomiser-10ml?gclid=EAIaIQobChMI4M-F3sDj_AIVxevtCh2jDg1fEAQYAiABEgKRqvD_BwE

                A spray or two depending on how many beans you are grinding and a little shake should be enough to make a huge difference with static but not enough to add unsafe levels of moisture.

                The only one time I’ve forgotten to RDT made a big mess, but before that I really had no idea what people meant when they said the Ode was a nightmare for static.

                  Nice comparison here. Looks like gen 2 is an enormous improvement! I’m going to get one on order.

                  The preorder was originally £314, so I managed to save a bit of money as well. Probably end up putting SSP MP burrs in it eventually

                  Coffee Roaster. Home: Sage Dual Boiler, Niche Zero, Ode v2 (SSP), 1zpresso ZP6 Work: Eagle One Prima EXP, mahlkonig e80s, Mazzer Philos and lots more

                  15 days later

                  Has anyone’s arrived yet?

                  I didn’t preorder as I don’t love it when people take the money before an item is even in stock but excited to place an order as soon as they start arriving.

                  4 days later

                  My ode gen 2 has just shipped today, should arrive in a couple of days. But I am away until Saturday so so no real chance to play with it until Sunday. Seems like more stores have them available so they should start appearing more

                  Coffee Roaster. Home: Sage Dual Boiler, Niche Zero, Ode v2 (SSP), 1zpresso ZP6 Work: Eagle One Prima EXP, mahlkonig e80s, Mazzer Philos and lots more

                    InfamousTuba

                    Was this Coffee Hit? I have an order in with them too but no dispatch note yet. Perhaps they’re working their way down the pre-orders.

                      It was coffee hit, I pre-ordered in November so it might take a bit of time to get through them all. Arrived today so I can start to play around with it. Currently seasoning with some older coffee and i will turn that into cold brew

                      Coffee Roaster. Home: Sage Dual Boiler, Niche Zero, Ode v2 (SSP), 1zpresso ZP6 Work: Eagle One Prima EXP, mahlkonig e80s, Mazzer Philos and lots more

                      Just had an email that mine is being shipped!

                      Look forward to hearing your initial thoughts!

                      So day one, ground through 2 kilos of some test roast at various settings mainly the coarse end so I can make cold brew. And you can see how much chaff and static has accumulated, I haven’t cleaned it at all and it looks very good. Fast enough grind time, around 30 seconds for 100g at the finest setting with a medium light roast. I have only made one pourover so far so I can’t really comment on how good it is yet, but I will put it side by side against my 1zpresso zp6 and see how that works out.

                      Coffee Roaster. Home: Sage Dual Boiler, Niche Zero, Ode v2 (SSP), 1zpresso ZP6 Work: Eagle One Prima EXP, mahlkonig e80s, Mazzer Philos and lots more

                        InfamousTuba

                        Nice! So that chaff is from an entire 2 kilos??

                        That’s an incredible improvement. You’d get twice that from 16g on the first gen!

                          It arrived this morning. Here it is dwarfed by the Super Jolly.

                          First impressions are very good. It’s far better built than I remember. Great weight to it and nice finish.

                          It’s fast. Didn’t time it but 16g can’t be more than 4 seconds at pour-over setting.

                          Static. I mean there’s no comparison. Grinds go straight into the cup, pretty much zero chaff. In fact it’s probably the cleanest electric brew grinder I’ve used.

                          Flavour is as good as expected but I’ve had a x54 so flavour is similar to that.

                          In the absence of any old beans I’m just using it straight away without seasoning, but I’m really impressed.

                          Is the ode purely for filter/pour over then ?

                            MattH

                            Coarser methods yes. It’ll do Moka pot, cold brew, Aeropress etc.

                            I think people have tried to make espresso with it and the burr set is probably capable, but it’s a stepped adjustment and Fellow have specifically said it’s not designed for espresso.