Shipping July released today. it could of course be an April fools joke. Albeit a strange one… https://www.nichecoffee.co.uk/products/niche-duo?variant=43187239846019

@"Igm45"#p40972 Not an April fools joke….people have ordered.

Some time to launch! 😏 I see from the specs that it's physically bigger than the Zero….assuming this is - at least in part - to house a bigger motor for the flats?

I still believe it's April fool's, too good to be true….

@"[unknown]"#p41017 Have you seen he full manual you can download and read ?

@"MattH"#p41026 https://cdn.shopify.com/s/files/1/0081/2076/2450/files/N685_INSTRUCTION_BOOK_ROW_83F_1_080323_WEB.pdf?v=1680015642

Two excellent videos from Jake. https://www.youtube.com/watch?v=JKdyBJ7TkhU https://www.youtube.com/watch?v=C90i5RVoBpo

@"DavecUK"#p41257 There are a couple of others there now too. (why does the plug change colour 🤔???)

> @"Del_UK"#p41290 (why does the plug change colour 🤔???) Dunno? RH Lead swaps colour as well in the starting clip

Can I chuck my hat into the ring? Right, first off, this is not an engineering review. I was lucky enough to be asked by Niche back in October, to accept the latest version of the Niche Duo. I had to sign an NDA and that was that. A couple of days later, a package turned up and I thought, I recognise that. On inspecting the packaging, it is quite clearly designed with the Zero experience in mind. The packaging has instructions printed on it for starters. Once you open the outer box, there is a strap/handle to help you lift the inner box meaning that you do not have to tip it upside down to force it out! I received a gleaming white model that arrived with espresso burrs fitted to it. A quick glance through the comprehensive handbook to make sure that there was nothing I needed to be aware of, and coffee here we come! When I dial in a new grinder, I always pull the first shot at whatever it arrives set to and take my reference from there. The third shot was spot on. 16 gms on an espresso setting takes me 16 seconds. I did not suffer from any static, the grounds were nice and fluffy. I believe the burrs originate from Mazzer (both espresso and brewed). Eventually, I thought it was time to try swapping the burrs over. Again, no help from Niche. They selected me as tester for their idiots instructions, and I feel well qualified for that role. I have made a video that I will post and it took me 70 seconds or so to swap over. You raise the lid, unscrew the silver dial, remove the screw to tighten down the top burr set, then remove it. Push down on the bottom burr set and remove. The process is then repeated with the brewed burrs (these are a different colour, blue) in reverse of course. I am deliberately keeping this summary vague! I have no idea as to how they get a big flat to be retention free. Having swapped the burrs over many times, and since access allows with ease, whenever I clean it out the retention is minimal. If I remember I will weigh it at some point but as any Niche Zero owners knows, you learn to trust your machine and just accept the claims! https://youtu.be/63Iv5gUy1JQ https://www.instagram.com/reel/CqlKJZjg_ZPsfdrHkp5cDIoL_KjSXhE5E5st-00/?igshid=Mzc1MmZhNjY=

@"Del_UK"#p41290 because I have a white extension lead, which I took out of the vid 😂

Niche duo - 83mm flat

drdre89

MediumRoastSteam Yes. So far I’m tossing up between Niche Duo or Lagom P64 w/SSP HU

drdre89

drdre89 Yes. So far I’m tossing up between Niche Duo or Lagom P64 w/SSP HU

Ok another challenger has stepped into the ring. The DF64 Gen2 with SSP Cast burrs. I like the idea of the plasma generator for mess free grinding. (As opposed to the P64 which needs RDT)
Or do I just wait 5 years and get the DF64 Gen 8 with all the latest gadgets then.

Twotone2

Cuprajake work well with light roast too for me personally

What ballpark grind settings for light roasts in the Dou would you recommend?

I’m currently between 10 & 11 for medium dark roasts but I’ve a kg of the Rocco mountain beans and looking forward to trying them.

I’ve never been able to get a decent espresso with my previous grinder when I tried light roasts in the past so gave up on them

Thanks

Tony

MediumRoastSteam

Twotone2 but I’ve a kg of the Rocco mountain beans and looking forward to trying them.

Rocko (from Foundry) for me is on setting 10 on the Duo. But that’s subjective to the relative zero point.

MediumRoastSteam

drdre89 Or the Niche Duo which doesn’t have any of that nonsense (because it doesn’t need it). 😉

Decisions, decisions.

tompoland

drdre89 I’ve got a Gen 2 arriving next week to see what they are like but the Duo will be your premium option if you are OK with the price tag here in Aus.

(For my taste buds, not a big fan of the cast burrs. Just me or course but IMHO they lack punch/depth for espresso and for filter the stock burrs that come with the Duo are the bees knees.)

tompoland

dfk41 classic David.

You didn’t use the respond button but its clear you are posting in response to my post.

No one is saying that burr swapping is needed, desired or required.

It’s just a bit of fun, leave it at that and lets move on.

dfk41

tompoland Tom, you are a million miles away on this one matey, unless you are the only person who swops burrs! My post was to try and suggest to folks, that influencers influence the latest thing, then move on to the next for financial reasons, whilst designers design. You will be well aware by now that when Dave ‘designs’ he spends hundreds of unseen hours makinng minute adjustments to the set up until he reaches a stage where he is happy. Along that journey he is treated like a schill,an influencer, out purely to make money etc etc. Why do you think that on the whole the influencers negged the Duo? The answer is because Niche do not reward them financially to say nice things……no affiliate links. This is an affiliate link, the bit you see:

https://www.youtube.com

This is the bit you do not see:
https://www.youtube.com/redirect?event=video_description&redir_token=QUFFLUhqazhUVTAtOUwyWDgtZ1B2OERyWkNoVzFQbllDUXxBQ3Jtc0trNE9PWWxTTVBQUEYtYzk2XzVjN1ppT2FTeS1HdzdoMkVBY1g1TFBxOFBSTzBMSUVYZnYyaHhudkZlSnMtS3hsQVBoTU5raTZySXFqenltdDAwQzY4d1dlRDFKVmlLblRlZ2dBaldfQmdXNXpRX1Fqcw&q=https%3A%2F%2Famzn.to%2F3TPJnay&v=NM1JQTDU39k

They are all out to make as much money as possible. There is still one Duo review that has not been published yet by a well known gob shite……..he was late to the market so what can he add? If he negs it now, then he is going to appear as a twat when there are so many glowing private users reports?

Tom, I was not having a go at you matey. For reference, if I was, then my style is to look you in the eye and tell you straight…..ask many of my fans……LOL

drdre89

tompoland interesting video from Alternative Brewing

The cast burrs peaked my interest as it won this contest in both espresso and filter … when I say won, it was the cup that was most balanced.

tompoland

dfk41 thanks for you response David.

Perhaps I’m still missing your point. It happens.

There are plenty of influencers who like the Duo.

As for burr swapping, the mutually esteemed DaveC has tried SSP burrs and Niche themselves feature in full living color a Duo with SSP Titanium coated burrs, on the Duo sales page in the form of a customer testimonial. (Not that said pic necessarilyimplies an endorsement of the practice.)

Like I say, I’m probably missing your point.

Let me know if I have, or we can move on.

Best…

delta76

drdre89 wow, he really upped his game. I meant production value is great - he looks great too. I did not pay attention closely to his videos before, because of the way he presented made me feel like he’s another Joe with superficial knowledge.

That brings another aspect of youtube influencers - unless you really know some stuffs to see if a youtuber is BS-ing or not, you are easily deceived by the production value. if a video looks great and the presenter is eloquent, you can be tricked into thinking they know their stuffs.

tompoland

drdre89 thanks and yes saw that a while back, it was very interesting. Agree 100% that it produces a very well balanced espresso but so do other burrs like the Itamill or the stock 151B burrs in the Duo. But in terms of one burr to do both espresso and filter, it’s probably as good as you are going to get, or the Lagom Mizzen.

drdre89

I’ve decided to pull the trigger on the Niche Duo. Thanks for everyone’s input. @tompoland which colour have you got? …

tompoland

drdre89 congrats. They really are amazing.

White. But then again, my Decent is white. (Surprisingly the white outsells the black two to one*. I would have thought it was the other way around.)

source John Buckman from Decent, posting from a discussion with James/Martin in the context of the ratio of black/white Decents and Niches sold.

drdre89

Black or White Niche Duo for my coffee setup? To replace my Zero…

MediumRoastSteam

drdre89 - Everything else is white. So I’d get the black one. 🤣

Cuprajake

black 100%

drdre89

MediumRoastSteam I thought I’d go black coffee machine, white grinder to keep things interesting 😁. Like the black and white cookie from Seinfeld

MediumRoastSteam

drdre89 - I personally quite like the Black Niches. 👍

DavecUK

MediumRoastSteam I personally quite like the Black Niches. 👍

Me too.

prezes

Would someone mind measuring the distance between the feet for me please ? Length and width wise from the furthest point touching the surface.

MediumRoastSteam

prezes
18cm by 13.5cm approx.

Igm45

Whilst we’re measuring could someone tell me how much clearance there is between the base and the exit chute?

I’d like to know if my tamping base and pf could fit below it.

MediumRoastSteam

Igm45

10cm removing the cup holder.

Cup holder is 1.5cm thick.

There’s s nut which secures the base where the cup holder slots onto which is approx. 0.5cm tall.

« Previous Page Next Page »