Thanks yes I’m really happy with it.

The timer is actually really accurate on the x54, within 0.2g each time, I just make sure to keep the hopper topped to a similar level.

Quick question - any suggestions on a skinny scale to use under the micra ? Not sure the timemore black will fit with a cup. (I could buy a acacia lunar but thats alotta money 😂)

I’ve had the Felicita Arc for a couple of years, really great but total overkill for me. Bought it for the auto tare and timer but now just use the scale functionality.

Tbh some of the cheaper scales on Amazon are fine, and very low profile.

    Ernie1 Isn’t the Arc seemingly the Acacia software in a different case ?

        MattH

        It may well be yes. It’s got a lot of functionality I don’t use. I like that it’s rechargeable though and I’ve travelled with it on occasion also to use with pourover.

        It’s also metal and feels very robust.

          More questions… if buying a tamper for the LMM do I go for a 58mm or 58.55 ?

          Very tempted by the tampers @StevenG91 has listed in the classifieds..

            MattH I don’t know the la marzocco baskets but the 58.55 fits vst, Pullman and IMS

                StevenG91 I have just messaged you on Instagram in case you are wondering who that nutter is :)

                  I think it was the other thread where the lack of a shot clock was mentioned. Now I also thought it was something the LM app would do but I could not find it mentioned (or it was a future release)

                  Saw this on insta - I wonder if its now available ?

                  MattH More questions… if buying a tamper for the LMM do I go for a 58mm or 58.55 ?

                  Not sure if the Micra ships with the same steel tamper as the Mini but it’s really great. 58mm with a convex base.

                  I found 58.5 doesn’t fit properly. The GS3 used to ship with a 57mm but I’d guess that was when lower doses were more common and the tamper needed to fit further into the basket.

                  This is the LM one I have. The only issue is that it’s not hugely ergonomic in the hand, I’ve tried to remove the base but no luck.

                      Ernie1 Not sure if the Micra ships with the same steel tamper as the Mini but it’s really great. 58mm with a convex base.

                      I found 58.5 doesn’t fit properly

                      This is strange. I used to have a 58.5mm tamper and use LM Strada baskets (apparently same as VST). Fitted perfectly.

                          MediumRoastSteam

                          That is weird as I’m pretty sure the Strada baskets are practically the same as the Linea ones, the latter just doesn’t get the certificate. But both made by VST.

                          It might’ve been difference basket volumes, the ones I have narrow as they go down the side so it depends on dose/density. A 58.5 will comfortably fit, but not be able to tamp as deep as a 58.

                              Ernie1 - ok. That makes sense. But if you dose 18g of coffee in those baskets (or whatever they are designed for, I.e.: 22g, 20g) sure a 58.5mm fits perfectly fine? As in, unless you put so little coffee into the basket, then you might have a problem.

                                  MediumRoastSteam

                                  Yeah you’re right, not sure what I’d done before to make a 58.5 bind.

                                  Weirdly the included LM one is actually a noticeable amount smaller in diameter than the basket, but the results are really good. I’d expect edge channelling. Perhaps the convex nature helps.

                                    Ernie1 also, I don’t know which 58.5mm tamper you have, but if I remember correctly, the one I had at the time had a slightly angled base and it was a tight fit. I didn’t have vernier callipers at the time so it might be even it was a 58.5 something rather than a perfect 58.5mm.

                                    I currently use a VST 18g, I dose 18.5g in it and I have a 58.5mm (measured with vernier callipers) tamper and if it’s perfectly.

                                    Edit: you posted above as I was typing this. 👍

                                      Ok so its in place - will get it up and running at lunch…

                                      I see it comes with a 14/17g basket - I guess I will need to buy a bigger one for 18g doses ?

                                      Also took a couple of pics with my timemore scale and a couple of espresso sized cups - you can use the single spout but without there is plenty of space - so no new scales needed at the moment!

                                        MattH I see it comes with a 14/17g basket

                                        I wouldn’t go by that too much. Just have a feel for the basket. Try to stick 18g in it, or 17g. Do you still have a good headspace?

                                        Best to get to know your machine and then start splurging on accessories :-)