Lelit Elizabeth Back to Back shots

SouthMark45

Thanks Medium I’ll give that a try

MediumRoastSteam

SouthMark45 - did you manage to get any better results?

DavecUK

SouthMark45 No variables have been changed from the first to the second shot brew pressure is consistent at 9 bars since I changed the faulty OPV yesterday and have a pre infusion of 10 seconds

Is this a steam preinfusion time, can you elaborate exactly on the preinfusion process you are using

SouthMark45

Hi Dave how can I check this….. sorry I followed your recommended settings for the machine about 10 months ago so not sure how to check this?

If you can tell me how to check I’ll take a look

SouthMark45

Steam boiler is on and above 115oC so I guess this is a steam pre infusion

SouthMark45

Sorry In addition I have the same advanced settings from your video on YouTube if that helps

SouthMark45

On a related note I haven’t emptied my steam boiler since I have had it should I be doing this as per your instructions “Maintenance and Pro Tips”?

delta76

SouthMark45 it is not a bad idea to empty the steam boiler once in a while.

SouthMark45

Thanks Delta will do

JonWoo187

MediumRoastSteam A tad bit off topic, but how is/was the M68 overall?

MediumRoastSteam

JonWoo187 - I had the second revision I think, back in 2017. It was a static monster, very messy if I’m honest. I was very pleased when the Niche Zero took its place.

Saying that, they have improved and made a few changes, but I haven’t used a new one nor have followed any further developments.

JonWoo187

MediumRoastSteam Based on a handful of videos I’ve found it looks a bit involved to pop the bottom ‘shroud’ off, tap or brush any retention, etc. Other than the Helor 106 I’ve only wondered about owning the M68, but it seems the function/design of the 106 is just nearly impossible to beat. Thanks for the feedback…

SouthMark45

Hi @MediumRoastSteam

Yes followed all the advise on here and it’s certainly better so thanks all for the advise

Cheers

Mark