T64 Grinder From Bella Barista

Adrianmsmith

odor4fun

Would a screwdriver not unscrew it?

Forget that, zoomed in, no threads!!

Why the flat screw head?…..

odor4fun

It is placed vertically in the body of the grinder, it must be removed with pliers

Adrianmsmith

odor4fun

2nd picture explains it. Thanks!!

gregE

Update: it came in. But how do i remove the parts here to get to the burr? I ordered this with SSP HU Burrs presumably installed so i want to check

gregE

Haha i’m (not so smart) and figured out it unscrews. But how do i tell if these are ssp?

dfk41

gregE This probably wont help but the ones BB supplied came with the SSP box and documentation. Perhaps @Jason1wood can post a pic or two. If you undo the screws on the easiest one to take off, they ought to be clearly marked if they are SSP

gregE

i was able to find that they are indeed ssp

![](blob:https://coffeetime.freeflarum.com/085758a4-1f60-4106-b2ca-e1d8362021b7)

DavecUK

gregE I for some reason can’t view the link?…but if you have removed them and seen with your own eyes on the back of the burrs, you should be good.

Adrianmsmith

And they say theres no trust left in the world 😎

Dont cross thread anything when reassembling and torque the burr bolts correctly to ensure flatness 😳

Will be back soon, just going to strip the car engine to check what grade aluminium the pistons really are 😎🤗

oddbean

Adrianmsmith just going to strip the car engin to check what grade aluminium the pistons really are

Didn’t know you can buy cars on alibaba

gregE

DavecUK Correct, thanks. I either don’t know how to upload images properly here or there was an error but i confirmed like you mentioned.

Adrianmsmith

gregE

First click the picture icon

Select the picture.

You may need to click albums and navigate to find it…..

It uploads and shows the links to the picture. Dont edit the 2 lines inserted.

In “edit mode” you do not see the actual pictures, just the links

Done.

gregE

anyone experience using the grinder for pour over or have you all strictly used it for espresso?

FadedFrontiers

gregE I’ve tried it for both and it’s okay for pour over (depending on beans and method), but really the HU do excel with espresso. Just remember to keep the motor on when going from coarse to fine grind settings!

mattp

Hi, has anyone tried the T64 with omni burrs to switch between filter and espresso? Is retention low enough to do that with this grinder? I’m enjoying it for espresso but getting my baratza out each time for filter and cleaning up its mess less so. The philos thread seems to suggest that grinder can offer a decent enough 1 grinder option for regular switching. Thanks

FadedFrontiers

mattp I’ve not heard of many users on here swapping the burrs out but it’s fine for both, retention on this and the Philos will be similar - both under 1g.

gregE

My machine has grind settings between 0 and 90 When switching the grind setting is it best practice to do it when the machine is off? Does it matter if doing it when machine is on or not?

Adrianmsmith

gregE

Then it doesn’t matter if it matters or not

dutchy101

It’s generally advisable to have the motor running when changing the grind setting finer. Don’t think it matters going courser

gregE

Thanks both. Helpful

« Previous Page Next Page »