Finally I have some pictures to share. Please ask for any details or additional photos if I have missed anything.
Price dropped to £700 due to the marks listed below, but overall in good condition.
I have discovered the cause of the intermittent overfill issues that occurred with my old water recipe. Turns out the previous owner had moved the earth lead from the boiler but hadn’t made a good connection to the frame with it, and it wasn’t connected as advised to the same connection the earth lead uses.
I have moved this now to the same bolt the earth lead is connected to make a direct connection to earth cable which should finally resolve this.
Some scratches that were from previous owner, I assume from cups?
No obvious marks by the steam wand and hot tap
Attempt to capture the light scratches on the drip tray and cup warmer.
Sides and back, a few scratches around the bolts and power socket and one bolt missing on the back, where I had planned to run a cable for an electronic water sensor, didn’t, and then lost the bolt! The main panels though in good condition.
