Any users of profitec drive?

MuddyOne

Just wanted to ask about your experience, or overall advice about PID . For some reason I can’t set my machine to 92c . If I set to 92c it gets to 93c and stays there, setting to 91c will get and show me 91c . Did not try setting other temperatures , no offset selected. Just seems bit odd.

Teaboy

MuddyOne have you tried 91.5?

MuddyOne

Teaboy machine does not allow halves, jump straight by 1. That’s very odd I’ll do some more tests with different temperatures and contact supplier to ask what is happening here.

DavecUK

MuddyOne Teaboy machine does not allow halves, jump straight by 1. That’s very odd I’ll do some more tests with different temperatures and contact supplier to ask what is happening here.

Which is probably your answer…set 91 get 91, set 92, it settles at 92.5. Not much you can do.

MuddyOne

DavecUK I’m only trying to find out if this is malfunction or just the thing with PID. This machine definitely has some problem with 92c lol. I set to 95 and it briefly will go to 96 but then down to 95 and stays there. Same with other temps.

Apart from 92, it stays at 93 would only like to understand other users experience. I will ask supplier.