I can’t seem to get rid of unpleasant harshness and dryness
MediumRoastSteam I will go half step lower then, temperature will thay same. 92
How did it taste don’t bother with looks. Even time
Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -
MediumRoastSteam this shot took nearly 30s I don’t know if it’s me but does it start too slow?
Daft question but how are you posting these videos in this format.
Its already been stated that youtube hosting is betterer!! …… And id tend to agree!! 🤓
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
Adrianmsmith streamable lets you upload quickly video, I didn’t realise someone had issue here, I know Jake mentioned that the videos look small but I thought that he missed full size button on video?
Look this is a screenshot, played from video straight from comment I posted above it’s full size and good quality , you guys view these videos in smaller format?
- Edited
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
its easier on pc, on mobile you have to hit the dots to enlarge, pressure reduces as the puck degrades so normal,
Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -
That’s the YouTube video if that helps viewing
That advice you gave earlier about taping porta filter, a blank basket is going to work just as fine?
I should be able to borrow accurate device with wires from my work on Monday to measure temperature.
No
I didnt tape all the holes 🤓
Will be no flow at all
It Will tell you the temperature of that blind basket full!!
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
What position is the flow control valve in from closed. How many ¼ turns open
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
One full turn and a quarter from closed 
- Edited
And can you confirm the knob is fitted correctly. I.e. confirm you have no flow when fully closed.
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
Yeah, I even did a test with scale how much water runs through,according to some German video on YouTube it should deliver around 210ml in 20s with full and quarter turn,mine does that. It also slows flow every quarter turn,confirmed with scale.
Looks like im not the only one,too bad OP quickly abandoned topic.
Adrianmsmith I tried to get into PID settings but the power off and two buttons is not working ,nothing is working. Left button only does not do anything, and the right one only factory settings.
Ah sorry, so they changed rhe programming
From memory it takes a few seconds holding the buttons after power on to enter settings mode, but on the older models.
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.
Adrianmsmith Ah sorry, so they changed rhe programming
I’ve been trying to tell you… 🤣🤣🤣🤣🤣🤣
MediumRoastSteam but now its confirmed!!!
Ade Smith. ACS Evo Leva v2. Kafatek Flat max 2, ssw 2024. Mazzer Philos, Craig Lyn HG-1 prime., WW key mk1.