New Members Introduce Yourself
Kape17 You still need to take the lid off, as I can’t identify which component is problematic from the photo you have provided. It could be from the safety valve, it could be from the anti backflow valve. I don’t know which.
- Edited
Kape17 Smartphone photos are incredible nowadays…what were you using 🤣
Joking aside, you need to identify which tube is gurgling or whatever it’s doing and if you can, a larger photo, I have bad eyes in my older years. Plus it’s a bit blurry when zoomed, so I can’t make out the components clearly.. However, if you can’t and I had to guess, I assume it’s the vacuum breaker leaking.
If so, I would replace it with the new fitment which looks like this:
Kape17 it is this part:
From your photo above.
And you hopefully should be able to buy just the part highlighted below:
And with luck the black connector might be just screwed in, hopefully.
Maybe contact ACS and ask them. Good luck!
MediumRoastSteam thank you, I will email ACS today.
DavecUK Hello Dave, I was not able to do a video but based on my observation this morning without the top lid:
I did not heard any weird sound or gurgling sound from the steam boiler during warm up but there were a few or weak drops of water going through the tube to the water tank, but after steam boiler had reached its temperature it stopped. Please see the picture where the tube is connected going to the water tank:
After I turn off the machine there were no gurgling sound nor any water going back to the water tank from the same tube.
I am not sure what is happening but the machine was behaving normal this morning.
Thank you in advance for the help I am getting from this forum. You guys are awesome! Have a great day!
Kape17 but after steam boiler had reached its temperature it stopped.
This is how it works: it shuts once the boiler reaches around 100C, so you get a jet of steam (or water bubbles in your water tank) if that’s where it’s venting to.
Thank you MediumRoastSteam So this is normal including the water bubbles or sometimes gurgling sound in the water tank? I will still order that anti-vacuum valve from Fluid o tech (The black Thermostatic valve)
as a spare part. I contacted them and they said they have 2 pieces on stock.
Kape17 - I don’t have a Vesuvius so I can’t confirm.
But the vacuum breaker works as above: steam boiler reaches about 100C and steam comes out, for about 1 or 2 seconds. It should not vent any other time. It you are seeing the hose venting when the machine is fully warmed up, then you have a problem.
This is all I can say really. I’m not familiar with he V in particular, but this is the principle of that device.
Kape17 Sounds completely normal and your machine has the updated valves. The vacuum breaker uses memory metal. A few years after ACS, La Marzocco also started using this valve.
I was offered a 2022 Profitec 800 for $1500. What do you think is that a good deal? Thanks
Kape17 - Good price, given that’s often north of £2k. But… Is is that you want? (Dipper, huge boiler, huge machine)
Kape17 what is your opinion on this machine , temperature stability
MediumRoastSteam Dipper, huge boiler, huge machine
Don’t have one so I can’t comment. But if you want temperature control, that’s not the machine for you. And… what’s temperature stability for you? Be able to pull 7 shots in a row at the same temp? What temp?