Review by Lance Hedrick, if any one is interested in. https://youtu.be/PBn223u7w2s

I agree with what he says, and that's what I find too. I prefer my mazzer, the niche works well for the Mrs milk drinks

@"Cuprajake"#p18736 Yeah! I saw your comment on his channel Jake! I can’t jusge as I am still a manual guy. Have been resisting to grab a Niche for > 1 year as it is another conical, though 64 mm. I am not sure it will make a huge difference to the cup compared what we have at home, except it is a massive convenience and a great workflow. I like medium to light roast and don’t mind medium dark for milk based. Brewing is very important for me. I would like an electrical flat; I still like my JX as it produces great shots, although it is a little boring to grind these days 🤣

Thanks for heads up.. A really well balanced review for sure. No big surprises perhaps, at least not for me. I had a Niche last year and sold it after a few months but was a little regretful. When a near new one came up for sale ast month, I pounced. It is such a charmer of a grinder. Small footprint, low height compared to everything else on my espresso island, easy and simple and certainly low retention. And in the cup, thickish and tasty for medium to dark espresso. Once I have the 83mm conical burr Livi seasoned I'll do a back to back comparison with the Niches 63mm conicals but with my indelicate taste buds I doubt that I'll be able to taste the difference.

That seems to be a reasonable review for his taste profile. I've only pulled maybe 25 shots with the Niche at work and 10 or so with grounds transported home from work. It is easy to dial in and make a tasty shot. In a perfect world I'd have a Niche and something with big flat burrs. I'm a sucker for berry / fruit flavor.. 98% of drinks are straight shots. Wifey drinks iced lattes.

Quite fair review. It’s funny how careful he speaks to not upset the Niche fanboyz.

He could have used any coffee in the world to pull his shot on, and he chooses a lightly roasted bean.......god, he woffles on and on! I emailed him a couple of times and he really tried to stress that he had no financial arrangement with any coffee equipment manufacturer........yea right

I do think he gave a balanced opinion, did not come out offending any one, appreciated the other coffee gurus really like them and so on. He didn’t say anything new, IMO. I thought he said it doesn’t work for him. Though he said it’s not conical vs flat, it is indeed that as he wanted clarity. As far as a light roast is concerned, I guess he used it to drive home his point as he seems to prefer light stuffs.

Not watched it all yet, but at the beginning he says the price has gone up and up - has it? I thought it had always been the same?

Price hasn't changed it will be exchange rates and import It's just a fancy way of saying he likes a different flavour profile, but and a big but thes a content creator and so far I have seen threads on 2 forums discussing his vid. Shock horror. It's spromethues all over again. There's nothing new to what he says, he's basically just describing the niche. 🤷🤷🤷

@"Cuprajake"#p18757 I take all this on board about impartiality, but if that is the case, why was there so much factually incorrect stuff? He is a poor Youtube influencer, claiming independence, heavily promoting Sage gear. In fact he went to OZ recently to review something for Sage.....wonder who paid for that trip? I wonder if his YT channel is monetised? If not, how does he make a living?

Niche Zero - One Year in Review

Beverast

Lol - he replied to a comment I made on his video but he must be doing some sort of jedi mind-trick because it looks like he is completely ignoring what I said. I told him from my experience I don’t detect bitterness when using the Niche on Wendelboe’s beans - his response, “This isn’t an issue with his beans. It is an issue with the niche. I love Tim’s beans. Perhaps you enjoy bitterness a bit more than I, which is completely fine. I prefer pulling his coffee on other grinders.” I don’t detect any bitterness translates to I detect bitterness. 😅

CoyoteOldMan

Beverast he must be doing some sort of jedi mind-trick

“These are not the comments I was looking for”?

dfk41

Beverast He made the same mistake with me matey. He comes across as someone who has a big mouth and would rather let it flap than say anything meaningful. Does he really think that 5 years post launch, the coffee industry is really waiting with baited breath for his review? There are folks like @MWJB whose opinion I really value and he does successful pour overs with a Niche. A lot of ths issue is his choice of beans, which leads us to thr whole point of his review. As opposed to being late at the table to sing its praises he took the other route in the hope of scoring more views…….very cynical! He completely ignored the good aspects. Niche have held the price over 5 years. They have set the bar for standards making other manufacturers raise their game. Their reliability is second to none and more importantly, he could not (apart from the endless Sage plugs, a company that he claims to have absolutely no affiliation with!!!!!!!!!!!!!!!!!!!!!!) he failed to name any serious competitor at or around that price point.
Other than that, it was an excellent review…….>LOL

Cuprajake

I dunno, those who choose to promote donso at their own will,

After seeing the Hoffman behind the scenes video where he shows probably in excess of £50k worth of gear, it’s more than just a love of coffee it’s an income.

The main problem with most coffee is it’s subjective and goes off ones own taste buds and the ability to use hundreds of pieces of gear.

His video’s done it’s job though and created enough talk around his channel. I’m presuming in his next few vids we will see something ‘big’ drop.

I know he’s been bugging up the Weber pf,

LMSC

Cuprajake Weber pf,

I didn’t see anything other than a one-minute video

CYP1A2

His comment on the Niche producing excessive fines seems to contradict what Spromethesus found with sifting the niche output.
Obviously sifting isn’t laser death star defractionation but still.

If the Niche produces excessive fines then why do people use it for brew too? V60s are killed by excessive fines. In espresso I think fines are not only ‘not bad’ but they contribute to a fuller flavour profile.
In trying to decide if I wanted a Niche (which I didn’t end up getting) I wanted to know what it could do with a V60 and the reviews always seemed positive.

Maybe, his Niche isn’t performing well?

If people like James, Spro and others were saying the same things then maybe, but they are not.

Cuprajake

That’s what was on Instagram too, on the Weber page from memory..

LMSC

Lol. Some dead spots on his shots using weber pf. Assume there was no pun intended! 😁

Cuprajake

Oh no it’s ok for that to happen now apparently.

The coffee industry seems to be going backwards,

Obs channels in the pf, declining temp profiles 🤷 can’t win

CafeNoir

Cuprajake I believe it’s probably more to do with getting a better “outcome” with the YouTube algorithm’s than presenting a balanced, properly researched review.

It’s why for me most YouTube stuff is infotainment, it’s not common to find much coffee stuff like DaveC’s work which I find far more interesting

CafeNoir

audiomacgyver ñ Funny you should say that…….lol! It’s precisely what I’ve pretty much settled on. Mind you my taste buds aren’t much to go on

DavecUK

There is a lot more that goes on in the industry that people will be blissfully unaware off. I have had a lot of industry connections over the last 18 years, and many things I have found out have surprised, shocked and sometimes annoyed me. It extends from the biggest corporate down to the smallest wide boy. Ending in the plankton of the consumer.

The SCAA have done a marvellous job of actually having the consumer look to them as a source of authority and truth…incredible considering who they actually represent..

The industry is like a big iceberg and most people only ever see the tip.

Gagaryn

I think you guys are taking this video too seriously. My take is this is just a professional YouTuber doing what YouTubers need to do to maintain their income. Controversy leads to engagement (comments, sharing etc) and engagement leads to the video being recommended in more users feeds by the mysterious YT algorithm.

He may or may not believe what he says but he could have said what he had to say in a quarter of the time. I think he is just making content for views.

Worth a watch -

LMSC

Gagaryn We know he has a revenue model and doing what he must do to keep the $ ticking. His video hasn’t said anything new. He knows he will whip passions if he touches products like Niche!

DavecUK

Gagaryn He may or may not believe what he says but he could have said what he had to say in a quarter of the time. I think he is just making content for views.

When he reviewed the La..gome Mini, I watched for 25 minutes expecting to see the grinder in action, grinding from beginning to end and then watch a shot made from it….He had one job to do in that review as far as I was concerned and my expectations were not met….

In that video, the only time I actually saw the Lagom grind beans (not the brief inset of it stalled), was when he picked up a bout 5 beans and tossed them in to show how quiet it was. 23m 12 seconds in. For the entire 25m he just woffled on and showed nothing of the grinder grinding.

Cuprajake

Hence my comment about spromethues weber

JahLaza

I’m a relatively new comer to this game starting a couple years ago, purchasing my first home machine just over a year ago. Thankfully I wandered across you guys (you in particular @DavecUK ) during the research phase! I couldn’t go shelling out the money involved without some level of confidence in what I was paying it for. Probably in that length of time the industry has expanded a huge amount still with the pandemic etc.etc. but I am now realising that the money makers have swooped in on this currently buoyant enterprise and attacking it from all angles with the marketing etc and it’s funny how it takes shape!! If this guy on this video here doesn’t make his bit there will be a hundred others lining up with their shpeeeel😂 So, great to have some sound knowledge and a place one can actually ask a straight question and answer (here) and meanwhile pass some time (and hopefully not too much money) looking at the various yt shows etc. out there

dfk41

DavecUK There is that WOFFLE word again!

Cuprajake

There’s a bloke having issues with his p64 atm too, but no one’s jumping and shouting about that, seems if you’re face doesn’t fit it just don’t fit.

LMSC

Am sure most of the members would have watched it. He reviews Wilfa and Niche one year on!

Obviously, we know he sells Wilfa !

Always enjoy watching his videos. He is one of the 3 reasons for my rediscovery of love for coffee! The other two are Dave and the forum

dndrich

Dave’s excellent and non-commercial reviews that I happened upon led me to up my game from the Breville Barista Express, a great entry level machine by the way, to the Elizabeth and the Niche. I could not be happier with the choices. Sure, there is wonderful kit for much more money, but for my simple tastes and needs, as well as workflow interests, I now have café quality coffee at home with devices that are fun to use, don’t break the bank, and are easy to service and maintain. For many this coffee thing is a hobby, and they have developed palates for nuances in the beans that are beyond my skill or interest. But for me these choices have been wonderful. The Niche in particular is a joy to use. I use it for drip coffee and espresso every day, and can do that with a single grinder. Perhaps there are grinders that produce subtle flavors that I might enjoy, but for my lifestyle the Niche could not be better. It is interesting how the Niche has become the consumer gold standard, to which all other grinders seem to be compared.

« Previous Page Next Page »