LMSC That’s a very kind offer, I’m happy to buy the coffee (I have no suitable beans on hand and need to get some anyway).
I can’t really address any issues on clarity and I don’t have anything else to compare to, on a day to day basis other than the Wilfa, which isn’t practical for espresso and both are a total faff for constantly switching from V60 to Clever, so it would be V60 only. (But as I said earlier, I don’t think the conical/clarity issue affects anything other than espresso).
LMSC This says it all. A lack of it sends every one chasing a wild goose! I agree, notes are very subjective. I do think finding notes / flavour which are not mentioned in the bag is likely to be a brew / espresso malfunction, unless we think the roaster could have also failed to notice them.
Just cup the coffee and see if it tastes remotely like anything on the bag. If the roaster mentions brew methods and describes different tasting notes for espresso and brewed then you should be able to get to them or at least understand why the descriptions are there.
Dark Arts always delivered for me. There was one coffee described as “shrimp cocktail”, I trusted they’d roast properly and I thought at least they’d be weird and boozy even if I didn’t get the exact flavour - to my surprise I pulled a shot and immediately got the reference, and remembered how the little foamy sweets looked from when I last saw them in a pick and mix thing as a kid. I suggest finding a roaster that matches your tastebuds if you’re struggling a lot or feeling dissatisfied with what you’re getting.
Unfortunately, I am not drinking any light / medium light bags at the moment. They are all medium roast from Django - like Santa Ana. This is good, but already sold out.
I am currently looking at Foundry Roasters’ Kabyiniro Rawandan, Jairo Arcila Columbian, Columbian Luis Anabal. All of them are medium roasts with a cup score of 88 - 88.5.
Rob1 Just cup the coffee and see if it tastes remotely like anything on the bag. If the roaster mentions brew methods and describes different tasting notes for espresso and brewed then you should be able to get to them or at least understand why the descriptions are there.
The roasters’ brew method is something I always look at to understand what to expect.
Haven’t tried Dark Arts. I will take a look. Thx
Rob1 suggest finding a roaster that matches your tastebuds if you’re struggling a lot or feeling dissatisfied with what you’re getting.
I find Blackcat, Django, North Star, Crank House are good and deliver what’s written on the bag. I have heard good things about Foundry.
The whole discussion on clarity, notes and flavour is more about understanding what coffee drinkers thought of them objectively, how they see it, their experiences and so that the members can learn / benefit from them!
Please a look at Django’s Chinese Coffee! I was looking at it last week. It is a light / medium. Haven’t bought it yet.
https://www.djangocoffeeco.com/products/china-gui-ben?variant=42481443733760
There is a 30% deal going on — please check the other thread for the discount code. It looks interesting though.
LMSC I’ve got this as got in sent instead of Chelbesa. With my limited tastebuds found it very pleasant and drinkable but nothing exceptional. Sweet hazelnut maybe aftertaste, very light tea like mouthfeel
mailto:kafar@btinternet.com
It was @DavecUK comprehensive review of the NICHE that convinced me to buy it. I’ve not regretted it. That said I’m open minded and also have the flat burrs of the GEVI for pour over. That said I disagree with all the negativity about Lance. I think he’s a genuine guy and he’s always responded to my questions sensibly and reasonably. He’s working withv GORILLA on a new burr set for the NICHE.. which I’m awaiting with interest.
Grahamsphillips He did mention the Gorilla Burrs for the Niche…it will be interesting to see if they do actually make a difference. I personally do believe Mazzer make a very nice Conical burr, I think Lance held a slightly different view to me…but I’m open minded.
He also felt the Niche might be better if it ran slower, which is also interesting, because when I did my voltage tests, the Niche would run down at 208V, at which point motor torque became a problem, especially for light roasts, and chamber clearance wasn’t as good. However, watching some of the small motorised Conicals and testing some myself, some do have to run on for a while to clear, so perhaps that’s a sacrifice worth making **if it can improve grind quality……**So I might end up doing a bit of testing…….If I can get some modified internals so I can slow it down and not loose torque. Perhaps there is some mileage on a Standard and Lo speed model Niche Zero…who knows?
Lance said he might try to do some tests using an appropriate speed controller, my fear was, he would lose a lot of torque with variable speed, so may have to limit tests to medium beans….If he does, I will be interested to hear about his findings.
Grahamsphillips and DavecUK Interesting dimension you are bringing Dave. It opens a new world of possibilities in this niche market segment.
How would it impact light and medium light then ?
Would Niche then have a choice of Burrs set?
LMSC It’s simply an idea at the moment in the mind of Lance and myself…in fact he might well be further ahead in his thinking than me. Who knows how it would impact light and medium light, until someone tests it. Lance is the one talking about Gorilla Burrs and I guess it will be down to people to buy them independently and fit them to the Niche if they want to. The Gorilla Burr idea is an independent one from Lance and not yet tested.
I think you are looking at the finish line and no one is in the starting blocks yet.
DavecUK 100%. In theory one could add an external voltage regulator to slow down the rotation but there’s the risk of a stall. I have to say the idea of a NICHE with flat burrs has its attractions.
Grahamsphillips 100%. In theory one could add an external voltage regulator to slow down the rotation but there’s the risk of a stall. I have to say the idea of a NICHE with flat burrs has its attractions.
Huge risk of stalling and you cannot fit/mount flat burrs inside a Niche zero, doesn’t spin fast enough either.
DavecUK their website does not list them, so not available yet.
DavecUK Nope not yet but imminent
Oh now I see why Lance didn’t like the Niche for his preferred beans, a new burrset is on its way.
I am only joking.
Or am I?
😆
Inspector That’s quite literally the 300-pounds gorilla… and you can decide of what “pound” I’m talking about.
There is always the discussion of clarity…I’ve often wondered if less texture is seen as greater clarity.
I’ve often thought it would be great to all have 250g or 500g of the same coffee and do a mass tasting of pour over, espresso, Americano Done on different grinders and kit, so we know what the coffee is but no tasting notes.
