ACS Vesuvius Evo Leva

MediumRoastSteam

I really would like to see this video - but I don’t have Instagram….

EDIT: Saw the video. Given the title of it, along the lines of “it needs a new chassis to eliminate movement”, it kinda makes sense that he choke the machine and pulled the lever 3 times to perform a stress test, which proved that the chassis need to be improved.

Will be interesting to see if quicker iterations to test and fix issues will take place given this machine has been in the making for quite some time.

DavecUK

MediumRoastSteam

DavecUK - Thanks. It asks me to log in. I asked my son to check out for me, thanks anyway.

Cuprajake

^ wrong thread haha

DavecUK

DenisS Remember when a bunch of hyenas came here at launch laughing their *** about the flex in the chassis of our ACs leva? (commercial group dual spring 10.5 bar)?

I think it’s time we laugh back at them now, check londinium IG post with their new vectis, 3 pumps to make a shot cause grinder was not dialed in (stupid excuse sin

I do remember their posts on this and other forums…. but we’re a bit classier than that. No doubt the Vectis has some issues to be ironed out before it becomes a product ready for sale.

As Roy Walker would say…

Systemic

DavecUK I do remember their posts on this and other forums…. but we’re a bit classier than that.

Well said.

teamd

Hey, anyone still up? New install and I am getting the AL10 error, pump is on but not pulling water. All 3 hoses are at the bottom, can’t find the post with the user who had the same problem. Search is not finding AL10 :(

DavecUK

teamd It’s the pump timeout error, it means the pump has been on too long. It shuts it down to prevent damage.

Ensure the lever is down, Steam toggle open. Then pinch and release the water inlet tube where it exits the water tank.

Or try and prime the pump by squeezing water down the tube with something (large syringe, bottle etc).

teamd

DavecUK i went ghetto on it

It worked great, thank you very much

tompoland

Cuprajake well said. It all gets a bit petty otherwise.

DavecUK

Glad it helped, the gear pumps can sometimes be unwilling to self prime if they run dry.

teamd

DavecUK Rotary as well, happens a lot.

Cuprajake

First dial of the black cat

trey_antipasto

Figured I should post a pic of the new machine. Its up and running in its temporary location while some cabinet work is being completed. No issues with shipping. Small issue with the power plug needing to be re-oriented but that was easy enough. So far really enjoying it. The steam power is going to take some time to figure out. I am coming from a gaggia classic where steaming milk is sort of a finesse movement. This machine puts out probably 3-5x more steam and I need to get a hang of the new steaming workflow and not overshooting temps.

MediumRoastSteam

trey_antipasto That looks stunning! Excellent choice of colour scheme. That’s exactly the configuration I would have gone with if I were to buy one. 😍

DavecUK

trey_antipasto it looks great, coming from a Gaggia Classic, what a treat you have to come. You will soon be getting some of the best Espresso in your life.

Don’t forget to read the Evo FAQ in the forum knowledge base…remembering it’s a continually improved and enhanced product.

Persevere with the 3 hole tip, it’s fast but worth it. Only drop to the 2 hole if the amounts of milk are super small. Stretch for a lot shorter time than you think.

https://coffeetime.freeflarum.com/blog

CoyoteOldMan

trey_antipasto This machine puts out probably 3-5x more steam and I need to get a hang of the new steaming workflow and not overshooting temps.

One thing that helped me quite significantly was to decrease the service boiler temp from 130 to 125 °C - I often steam very little milk (35-40 g for two macchiatos), and even with the 2-hole tip I was regularly spilling milk out of the jug.

trey_antipasto

DavecUK the espresso is already a noticeable jump from the Gaggia. I look forward to it getting even better. I even had my Gaggia fully modded with PID and dimmer control for pump control and upgraded steam wand. I had some reservations that the Leva wouldn’t be as big a jump and I was wrong. Very noticeable in terms of workflow/experience. The shots are also different. I can now certainly see what people are referring to with the body/roundness of the lever shots. The shots on the gaggia were good especially after the mods but right out of the gate the first shots off the Leva are as good or better.

LMSC

First dial of the Smith Street Guatemala

16.5g, 41g liquid and 35s! Perfect already.

Can be a little more patient with the WDT.

hellojava

Hi folks. It’s been a while since I’ve been here. I’ve really been enjoying my machine! I bought the evo leva and it was delivered around January of this year.

On Monday morning my machine wouldn’t turn on. Luckily, that evening Paolo and team walked me thru what could be wrong, and we found that my input power module or EIC was burned to a crisp. The module is a corcom 15srb1-s, and I’m having a hard time finding it in the US. Does anyone know where I can get one stateside instead of waiting for a replacement from Italy? It’s a 5 dollar part, and was very easily to remove (and likely will be to replace as well).

TLDR: Anyone know where I can find a evo leva compatible power input module/filter/IEC similar to a corcom 15srb1-s in the US?

DavecUK

hellojava

you could probably buy an IE C14 female type connector like this and hard wire it in….then connect to it. It would mean removing the spades though. The other option is to make up a short length of cable attach female (spades) to it with a proper cripmer and connect up to it as an extension whilst you wait for the part to arrive.

SCHURTER IEC MAINS CONNECTOR, C14 type, male, cable

Cuprajake

hellojava

have a look at this post

« Previous Page Next Page »