ACS Vesuvius Evo Leva

SpacemanSpiff

Paolo5 yes they are. I have ordered my vostok with a lower pressure spring setup. They’re shipping me the standard higher pressure spring in case I want to switch it out as well.

kilo

trey_antipasto , yes, this is the spring I have used, I have the machine of @NelisB

BrendaninBrooklyn

dfk41 that was quite eye-opening and also quite funny

BrendaninBrooklyn

Does the new version of this machine expected in Q1 2024 have a new name – v2, Mk II, or any other designation as new?

DavecUK

BrendaninBrooklyn Does the new version of this machine expected in Q1 2024 have a new name – v2, Mk II, or any other designation as new?

No, but I think it should, assuming you’re talking about the Evo and Vostok…in a sense only the Evo has changed fundamentally, but I have to see if the same basic version still exists (I don’t think it will exist as there has been an internal frame upgrade). So logically it should become the ACS Evo MKII, which can then be accessorised.

BrendaninBrooklyn

DavecUK Yes, Evo. They might want to really think about adding a MK II or similar designation ;-)

dfk41

DavecUK How about changing the model from Vesuvius to Etna which is arguably the better known mountain since it is still active. That would encapsulate the changes nicely. The changes are pretty substantial as well and desrve more than a Mk 11 designation

DavecUK

dfk41 might be confusing because the case is derived from the Vesuvius case….and people are now familiar with the Vesuvius Evo. I understand where you’re coming from though.

Paolo_Cortese

Well EVO2 should be fine i think. About the upgrades the new one will have the new frame which means that have an additional bracket to fix the flexing issue that some people complain even if hundreds of customers live with this problem even because the frame will return always in the right position and it’s very small think in my opinion especially if compared with other machines that have a standard carbon steel painted and a tiny front panel instead of a 304 2mm panels used on the EVO. Also the EVO2 will have the rotary pump as standard, the dosing system and safety lever system will be an optional. On the Vostok only the safety lever system its an optional. Also i’m thinking about the possibility to add a wooden finishing on the panels of the EVO2 too. I should check how it looks like.

Paolo

BrendaninBrooklyn

Paolo_Cortese This will be a remarkable product. An EVO2 designation will let everyone know you’ve moved the goal posts in this class of machine.

MacPhisto

Paolo_Cortese

If I have an Evo on order, will I be getting the newer version of the frame or the earlier version? I’d rather make sure I’m getting the most current features on a machine I plan on enjoying for a long, long time.

DavecUK

BrendaninBrooklyn I prefer Vesuvius Evo II

The EVO2, looks like a car or a mobile phone company product….

Paolo_Cortese

DavecUK

evo mk2 - Bing images

BrendaninBrooklyn

DavecUK Agreed; more stately and definitely my preference too

Gagaryn

I prefer Evo Evo. :-)

Adrianmsmith

Gagaryn
How about Lon!??* killer 😎

LMSC

Eventually, every one is going to call it as Evo II! 😊

Jony

I prefer none your killing me now.

Loonster

I prefer the simplicity of the same name.

Adrianmsmith

Adrianmsmith
Just to show every situation has at least 2 points of view.
Seems that my evo is more bent than most…..
….. But has no impact at all on performance…..
…. Until you find the Plus side.

Yesterday I got around to adding the drain hose.

But look how well it drains!! Wouldn’t get that if it wasn’t bent!!

I had reservations about the drain being on the back and not the bottom.

Currently deciding if it’s worth splashing out on a new chassis just to satisfy my mild OCD.

DavecUK

Adrianmsmith You could just get the foot rails, ask for advice from ACS.

« Previous Page Next Page »