Was tidying the workstation this morning ahead of moving to another location. There was a soft 'ticking' noise coming from the machine. So, powered off, ticking still there. Disconnected from mains, moved trolley and ticking still there. Sounded similar to the pointers on an analogue watch. It did eventually stop (maybe someone left an italian watch inside the case when testing) but i'll keep an eye on it. More specifically, an ear. Anyone heard of this before?

@"skylark"#p49600 - when the noise happens, is the machine hot or cold? Does it happens if the machine is plugged in, but it’s cold? If not, then it might be just the machine cooling down, including water in the hoses, fittings, etc.

Back again. Been using the machine this morning, switched it off after cleaning around 4pm and have just had another listen. It still ticks! Like a very soft clock, tick, tock,tick, tock. It's not powered on, feels cold/lukewarm to the touch, the boiler went off at lunchtime so only the machine itself was on to do a weekly backflush. I could maybe ignore it if it was more of an irregular sort of thing but this is definitely as if it has some sort of timer going on, and its switched off, still powered though at the wall. Now then … anyone else 'listened' at all? Why do i doubt it … it's just me then!

@"skylark"#p49682 - unplug the machine, wait 2 minutes. Listen out again. Can you still here it? Are you able to pin point a location in the machine where it's coming from? I've tried putting my ear around it, but I can't hear anything!

Not really. I first heard it when i was reaching for the power plug so i'd guess left hand size as you're looking at the machine. It's a definite regular ticking which i'd not think was indicative of heating up or cooling down contractions. I suppose i'll keep listening for it but as to whether its answerable? Can't say i am aware of it when the machines on but really wasnt aware until yesterday when i thought 'what's that noise' and looking for a clock in the room, why i've no idea cos we aint got one in the kitchen. Anyways, if it gets people listening to their machines then i guess it'll sort itself out soon …

I think mines doing similar thing when service boiler is cooling down. I will pay attention tomorrow.

@"skylark"#p49688 - so, I had to check. Machine was last used in eco mode at 1pm. So it’s completely cooled down, as it’s now 8:30pm. As there are no TVs or noise around now, I went and checked it. And, mate…. You are not going mad! So I unplugged the machine and the noise is still there. I then moved the machine somewhere else, and, to my surprise, the noise is still there. If I am to put a place, it’s the LCC. Just put your ear over it. I can hear quite clearly. The frequency is a tick every 5 or 6 seconds or so. It’s very faint, I can’t hear unless I put my ear right on it. It’s a very similar sound to my wrist watch second hand. Sorry folks, old fashioned guy here, no smart watch… 🤣🤣🤣🤣🤣 Could anyone with an Elizabeth check and report back? Thanks! @"Cuprajake"#144 , what about the Bianca? If you put your ear over the LCC when the machine is cold, do you hear a tick?

Yay!! That's exactly it, I'm not imagining things then. Just checked again and its been off for some 5hrs now and i can here it from a distance of about 18", loudest at or around the front top'ish, more central than not. Still ticking, not as regular as before so maybe about to sleep ….. battery operated Lelit Lizzie, there's a novelty.

@"skylark"#p49692 my son has a stethoscope…. I might play doctors later 🤣🤣🤣🤣🤣🤣

Lelit Elizabeth 'ticking'?

soundwave1

MediumRoastSteam it’s unplugged from the power at the wall.

I can get the ticking to stop by turning the machine on!

Got me beat.

MediumRoastSteam

soundwave1 I can get the ticking to stop by turning the machine on

Is that instantly? As soon as you turn it on, it goes away?

soundwave1

MediumRoastSteam yep! Turn it on and it stops ticking.

It’s actually just stopped ticking now as well, about 11 he’s after pulling a shot, and 5 hours after being unplugged from the wall.

MediumRoastSteam

soundwave1 - if the ticking stops immediately after turning the machine on, it must be related to the electrics (e.g.: ticking stops as soon as there’s electricity flowing through).

It’s just bizarre!

Ps: did you try emailing lelit directly (care at lelit dot com)? I wonder if they might have a more sensible explanation than us here!

soundwave1

MediumRoastSteam Emailing Lelit is my next step :) Will report back if they share anything valuable!

« Previous Page