For all of you that have static issues with your grinders (as do I with my Femobook), go order the Acaia Ion Beam. This thing completely solves static issues. No more spritzing of water, etc. Pretty amazing to watch the difference. I saw the change immediately when I used it.

For filter, at least, I am still undecided as to whether eliminating static is a good thing. I see the importance of good dose consistency & low retention, but not sure I want all that chaff & particularly tiny fines in my dose.

> @"sketchy"#p54014 For all of you that have static issues with your grinders (as do I with my Femobook), go order the Acaia Ion Beam. This thing completely solves static issues. No more spritzing of water, etc. Pretty amazing to watch the difference. I saw the change immediately when I used it. I should be getting one to test soon…

It might be an interesting idea but at $150 (plus shipping and tax) I think I will try James Hoffman's technique of a small fine spray on the beans before I add them to the hopper. It worked very well for me in the past. I will report back on the results.

@"MBdoc"#p54023 I’ve done that and it works okay but with a tendency to gum up the grinder in areas that otherwise wouldn’t

This [video](https://youtu.be/-UU9JdYOvew?feature=shared) has some good side by sides, noticeable difference and less messy for sure but I'd have expected them to be a little more powerful given it is its own stand alone unit which needs plugged in. That said the built in anti-static on the Fellow Ode gen 2 is fantastic, makes a massive difference and has the bonus of taking up no more space.

Hi Sketchy I didn't have that problem with the original Mignon set up but with the single dose hopper and bellows I am sure I can puff out any build up. You only need a very slight fine spray on the beans and then a good stir before they go into the hopper.

@"MBdoc"#p54040 Not my experience with the Femobook. The light spritz of water helped, but not to the degree that you'd desire and end-state. I'm also not convinced the water mixing the the oils helps with the cleanliness of a grinder, which has been noted elsewhere. Anyway, I was so dang impressed with the Ion Beam, that I had to share with anyone else in a similar situation.

These things also work very well as an anti static device. Small and cheap. https://amzn.asia/d/hcXJqfz [URL=https://i.imgur.com/05ktvGC.jpg][IMG]https://i.imgur.com/05ktvGC.jpg[/IMG][/URL]

An interesting idea Tompoland. I found a few on Amazon in UK and France which were pretty cheap (about €20). How do you use it for the grinder?

@"MBdoc"#p54061 here you go sir ... https://youtu.be/Yg5Tt1IAW7A?si=AHDgwpPBvLWvyMn0

Acaia Ion Beam. Get it!!!!

Rob1

They should partner with Ozone to market it.

MBdoc

So far the spray has reduced the static quite a bit. Ioniser might be more faff to use than this so I will stick with spray for a while longer.

MediumRoastSteam

MBdoc - it’s well documented that RDT - Ross droplet technique - essentially moistening the beans prior to grinding can and most likely will corrode the burrs on the long run. Just keep an eye on them for rust spots.

DavecUK

tompoland These things also work very well as an anti static device. Small and cheap.

I was going to try and buy one of those a while ago, but I am too frugal…. Now I have seen it work, then I might stump up the readies and get one…although I don’t really have problems with static…although there is always a little.

MBdoc

Have a look at Amazon for lookalikes Dave. I have seen several in France for about €20.

DavecUK

MBdoc Have a look at Amazon for lookalikes Dave. I have seen several in France for about €20.

I got my peepers on one for about £5

MBdoc

A great deal but it seems to be out of stock at the moment.

DavecUK

MBdoc I bought 2 different types, just find one for £5 delivered and try it. The other one I bought was this…different orientation of Ioniser. Out of stock now.

MBdoc

DavecUK How have you got on with the little static buster?
Mine finally arrived yesterday and I tried it today. I ‘squirted ’ a bit into the hopper before grinding and held it beside the outlet spout while grinding and there were no grounds sticking to the sides of the cup after the grind. I wil see how it affects build up in the spout after a few more grinds. So far looks promising.

DavecUK

try this one

FadedFrontiers

DavecUK gotta love the promotional pictures, not sure who’d wear it around their neck let alone go running with it 🤣

MBdoc

Hi Dave It will be interesting to hear how it works for you.

I found this one in France which is on the way

https://www.amazon.fr/gp/r.html?C=1HW4LFIAG5R5R&K=1F8NJIYNQHQPG&M=urn:rtn:msg:20231002075959aa5a066485224bfaa218f295fca0p0eu&R=E03HLPYBCHW3&T=C&U=https%3A%2F%2Fwww.amazon.fr%2Fdp%2FB0CJLGSLH1%2Fref%3Dpe_27091421_487030221_TE_SCE_3p_dp_1&H=LSUPA1WT21Y2HDCFUV4VSP5CURGA&ref_=pe_27091421_487030221_TE_SCE_3p_dp_1

I don’t seem to have any static problem with my new Mignon Single does grinder in UK but I might look at Amazon when we get back if it develops. Can’t break any bones for a fiver!

DavecUK

FadedFrontiers gotta love the promotional pictures, not sure who’d wear it around their neck let alone go running with it 🤣

Well, none of those people are wearing it, it’s simply been photoshopped on (badly) <lol>.

DavecUK

MBdoc

https://coffeetime.freeflarum.com/d/2109-personal-ionisers-and-static-when-grinding

« Previous Page