Sworks one off shower screen for ACS

What you really need is 2 ims screens

Or

Tiny curve in the screen works too 😅

I thought shower screens had been debunked

Raja123

The trick to installing them…..

Sit on a chair with shoulders approx level with the shower screen location

Put circlip on a flat surface

Insert pliers, Open pliers slightly and Pick it up , ensuring pins are flush to the surface of the circlip, thats important.

Insert shower screen with other hand with one finger holding it.

Swap finger as you offer up the circlip, locating circlip at back edge. Use the free hand now to press on the circlip near the pliers pins, pushing it in position. Release pliers.

15 seconds max 😎🤪

Jason1wood

But, but, but you rejected that suggestion some weeks back ,🤪

LMSC

Half the fun of the hobby is messing with things, messing some things up and replacing them etc 🤗☺️, to me anyway!!

Jason1wood ohhh matron

Raja123 yeah i agree to an extent,

But what happens when we introduce paper or mesh filters on top of the puck

While the decent shower screen is £17 that’s worth a punt, cant imagine the cost if the sworks for the evo, but then the evo can have triple the flow so dunno now much difference that makes at those fill rates. , 2seconds and the puck is over 2bar.

Jason1wood

His acs evo is also guite small for a domestic environment ,🤪🤭

Yes. It usually comes down to that. Here, it seems to be centered around d convenience of removal for some, and a potential better distribution for wetting (not to be confused with rate of fill and soak time). Add the hobby and willingness to experiment on top, and Sheldon has enough to sustain a bespoke biz.

Theres more going on though that we cant see, when it’s all under pressure surely the fluid dynamics change, the pf decent made to catch water is a good idea, but again without coffee kn there was cant truly know whats happening.

Then i think to myself can one really taste a difference with that given there are so many variables

Ive not looked at the spec for the new rotary pump used in the evo 2 but i know the gear pump was very quick fill.

When we are trying to mimic the steam boiler infusion pressure of gone by levers.

Shower screens are generally more about what happens during fill rather than when under pressure. Pathways form where water first hits, and if, due to uneven distribution, there’s a disparity on the surface of the puck, it’s where most of the water will tend to go when pressure ramps. That’s the theory anyway (and what some people are willing to pay substantially to find out).