So there's a lot of people buying Minimas on here at the moment and a few experienced users so I thought a thread dedicated to the Minima with questions / information on the machine would be useful to myself and the others who have recently purchased and are about to take the plunge (and to prevent myself from hijacking other people's threads). One question I have to kick us off is about the brew boiler and PID. For some reason my Minima does not seem to like bring set at 93 degrees. Despite me having it set at 93, the display shows it settling at 94. I'm not sure if this is indicative of an issue or standard behaviour. It occasionally will drop to 93 but then goes up to 94 again

Edit…I've just found the PID Values Explained section at the back of the manual where it explains this is normal.

Mine does the same and I confirmed with other Minima users when I bought the machine.

> @"dutchy101"#p6482 Edit…I’ve just found the PID Values Explained section atvthe back of the manual where it explains this is normal. Very good manual that one…, online version available as well. https://sway.office.com/xofz72xFBgYyiWqi?ref=Link

@"dutchy101"#56 @"HVL87"#57 How have you found the stock filter baskets? I'm already thinking of upgrading, but won't do unecessarily quickly - although that is also partly tamper dependent.

@"PortafilterProcrastinator"#p6679 they are fine. Easier to pull a nice looking bottomless shot - in my opinion that doesn’t mean much. I moved on to a 18g VST to optimise my shots as much as possible.

It's been a bit of a transition for me this week as I've changed from Sage 54mm baskets and didn't have a 58mm tamper until a few days after the machine arrived. I got a new distributor yesterday which has also helped so still finding my feet a bit with the stock baskets, but pretty happy with them so far

Thanks both, if they're a similar ID then I can get a tamper (thinking bravo ATM) first and upgrade the basket later when looking for refinement, rather than just trying to make something palatable!

Yeah - I've got a Nomcore 58.5mm tamper on order and coming this week so will get a better handle on things once that has arrived

@"dutchy101"#p6686 I'd be really interested and grateful to hear how you get on. How are you finding the Minima overall?

Absolutely loving it - so glad I went with it I'm really enjoying using it. How about you? Made my wife a tea using water from the service boiler to drain some water this morning and she commented how much better it looked and tasted (using the zero and remineralised water I've been making up).

The General ACS Minima Thread

simonc

dutchy101 Thanks.. yes I had considered felt and sliding it. The other option is I put it in the walk in pantry which would have room, but just worried about steam in a small room 1.5m x 1.5m with little ventilation.

Could I check what the measurement is from the handle when just inserted, and sticks out beyond the left hand side, to the wall?

At least this bit I can understand… I am baffled by water solution to my very hard water.

dutchy101

So if you can get a spare 5cm and keep the machine this far from the wall that’s just about enough clearance to get the portafilter in. Not sure if that answers your question, but it does slide very easily making it very easy to do this when in use.

I don’t think using the steam wand in the room you have as an option is an issue. When I open the wand before steaming I have a slightly wet microfiber cloth wrapped around the wand

dutchy101

I’m using a Zero water jug to filter my very hard tap water (circa 335 TDS). I make up 5 litre batches and remineralise with 320mg of sodium bicarbonate to bring up alkakinity. It’s a temporary measure until my Skuma reverse osmosis unit is delivered, which will hopefully be in June

simonc

dutchy101 I’m thinking I’ll do the same. The zero jug that is. Not sure I’m going to be allowed to buy anything else coffee related for a long while after this!!

simonc

dutchy101 out of interest how long does that 5l last you?

Alexvs

simonc Just to add, I have mine on timer via a smart plug and have mine come on at 06:45 and it’s ready by the time I’m ready half hour later. I always make milk drinks and it takes somewhere between 5 and 10 mins for the steam to get up to heat. The brew boiler retains heat well so is quicker later in the day when I turn it back on for the 2nd drink.

You won’t go wrong with the Minima if that’s the way you go.

dutchy101

About ⅔ weeks I’d say. That’s making ⅔ milk based drinks and backflushing every day. I also draw water for a cup of tea most days / every 2nd day

simonc

dutchy101 great. That’s not too much effort then. I’d make less probably. Although then if I’m only making 10-15l in the 2 months you are supposed to replace the filter it gets expensive per litre.

Cuprajake

Would be fun to see a quiet x pump in one of these.

The solenoid group is fantastic

PortafilterProcrastinator

Cuprajake An experiment for when it’s out of warranty!

I’m also interested in the membrane regulator mentioned in @hornbyben Ito thread and @DavecUK comments.

The pump nose doesn’t bother me at all, but my curiosity gets the better of me given it is the one thing that gets raised about the machine most often.

dutchy101

I got about 30 litres from my first filter before the TDS increased to 1

DavecUK

PortafilterProcrastinator A membrane regulator might be a way, or simply pop in the Lelit pump.

hornbyben

PortafilterProcrastinator given it didn’t work for me (very low flow and pressure issues), I wouldn’t recommend it.

I have heard that they have quite a high faulty rate, so I might have just been unlucky. I would have sent it back, but as it came from Germany it didn’t seem worth the hassle.

PortafilterProcrastinator

hornbyben Thanks for the experience/ advice.

I’ll continue to enjoy my machine as is, one for the future.

simonc

a quick question that is not clear from the manual. Is the 44cm the size of machine or how far it sticks out from the wall? My counter is 44cm deep so might not work if the cable pushes it out from the wall by 3cm.

DavecUK

simonc using a right angle cable helps and the feet might best back at the front

dutchy101

simonc

Just measured mine when pushed back flush against the power cable and you’d need 48cm to keep the front feet fully on the edge of your counter.

simonc

DavecUK Cheers. So the feet are set back a bit from the front? About ready to pull trigger on a 2nd hand one one but worried the cable might still push it just a bit close to the edge.

simonc

dutchy101 thanks that was the photo I was trying to find online

Rip minima. the dream was nice 😪

dutchy101

Sorry to break your dreams mate. Better to find out now.

You could always fix a slab of nice wood underneath to take you the further distance…..

simonc

dutchy101 cheers. The rear “wall” is actually wood and sits 5cm from the actual wall behind it. There’sa chance I can cut the wood in a way my wife agrees so the plug can fit in…. maybe.

« Previous Page Next Page »