https://www.youtube.com/watch?v=_Tn84Gp_xcQ Any thoughts? How would you use the new function? @"DavecUK"#1 is there any way you could test the new V3 of the Bianca?

Thats a very good feature to add, wonder if rrp will be effected.

@"RobertRo101"#p9667 I've been using the V3 for almost a year now…low flow works well. Especially good if you don't want to move the paddle..It was one of my favourite new things on Bianca. For the upgrade you would need a new LCC, some wiring and the additional solenoid with a slight plumbing change.

@"DavecUK"#p9673 I was certain that you would have had this verision already:) can you share any info if you are going to update the Bianca review on your website or post a video about some testing with the new future? Are there any more updates we can expect?

> @"RobertRo101"#p9674 update the Bianca review on your website or post a video about some testing with the new future? Are there any more updates we can expect? The Bianca Review is a version 1, so quite old now. I may well update it…essentially the machine is unchanged except for the addition of the new features. I may have a few extra features the production version doesn't have, and my solenoid is slightly different (they are sending me a replacement, if I get any problems with mine)… I was originally sent it to try it and see if there were any problems…which there were not…it wall worked very well. I don't think I have a manual, but I will download the production manual as my version a year ago has something else I won't mention, until I find out if it was in the production version. I suspect my software might not be exactly the same version, but again until you guys by one and if the software version is on the back of the LCC I won't know…plus mine could still have been a reflashed LCC. I have to be very careful when commenting on pre production stuff so early in the chain. Really like the version 3 though, as compared to the version 1, lots of features were new….and I do need to update my version 1 to a version 2.

This is why, despite my recent challenges, I really love the Bianca (and Lelit). I have been toying with updating to LCC 2. I may hang fire and update to LCC v3 though, with my new found boldness for tinkering with the machine 😉

The Low flow used in conjunction with PI seems to be a good combination. Dave, have you been using just the low flow or do you always use the PI with it ?

Really great feature. It basically mirrors the profile I use 99% of the time so it’s handy to be able to automate it. It’s also really awesome to see Lelit iterating on what is already a fantastic machine. It’s impressive how quickly the group head pressure changes when the low flow kicks in.

this is awesome. i'll get an upgrade kit when its available.

Its a good option, not sure id rip my machine apart for it, but its a good out the box incentive to buy the v3 over a competitor

there will hopefully be some other upgrades that the new LCC bring that are worthwhile.

Lelit Bianca V3

giampiero

Cuprajake in your youtube video “Carlos Alfredo light roast espresso” i noticed the group head drain section leaking during the shot.

delta76

giampiero no way an expert but isn’t that normal?

Cuprajake

its always done that, i thought they all did

giampiero

Cuprajake if you pass the max pressure that the drain valve spring can support, this happen, but usually a drain valve spring should keep closed the drain valve until around 12 bars, and in the video of the portakeeper is visible the group head gauge needle seems in a high pressure value.

Obviously not a problem of the machine.

delta76

Another one that does Lelit Bianca Espresso Machine - Pulling a Shot - YouTube

MediumRoastSteam

delta76 Another one that does Lelit Bianca Espresso Machine - Pulling a Shot - YouTube

I love the contradiction… “That’s looking pretty good… That’s not what I wanna see, at all”. 🤣

Finest example of youtube trash.

Cuprajake

@DavecUK

DavecUK

Cuprajake There is the odd drop, but very little, it will have no effect on the shot. What pressure were you using?

Also worth remembering that the preinfusion valve is designed to open at 4 bar, sure they put a stronger spring in, but:

the valve never needed to seal at up to 12.5 bar like the vent valve
I doubt they used a 13 bar spring
there could be crud on the valve seat.

Cuprajake

MediumRoastSteam thats the guy who rips the niche products in comments sections everytime he has chance, but then he’s a seller soooooo

delta76

MediumRoastSteam I don’t even care what is said. Just remember I’ve seen the drops and look it up :)

MediumRoastSteam

DavecUK Also worth remembering that the preinfusion valve is designed to open at 4 bar, sure they put a stronger spring in, but:

I thought the Bianca had that part of the group completely removed? Maybe I’m wrong.

delta76

MediumRoastSteam not removed but I think they put a stronger spring which essentially disable the water line pressure pre infusion? the valve opens at 2.5 bar with the standard e61 and bianca has like 4 bar spring.

MediumRoastSteam

delta76 - I looked at diagrams. I stand corrected. For whichever reason I thought on the Bianca the chamber wasn’t there at all. My bad!

Cuprajake

The shot in the vid was low flow start/finish

its always done it, the pump is set to 9.5 bars it will shot 10bars at the puck, but most times im grinding for a low bar shot

delta76

MediumRoastSteam no worries, i think i misremembered something also. This hobby is really time consuming

Cuprajake

my v2

delta76

Cuprajake

have always been wondering why people shots look better than me. It seems that the E61 in general makes it easier to capture a shot than integrated :)

Cuprajake

looks quite chaotic. very coarse grind with very low pressure ?

Cuprajake

1bar shot

Cuprajake

Yep 15 on the duo,

With a bottom paper to speed flow and top mesh in a Pullman 876 basket

19.5g in 70g ish out, that bloody quick you have to guess the stop haha

delta76

Received mine today

boys it’s heavy. And it feels very easy to scratch … took me way longer than expected (admittedly I did it a lone and I’m not the strongest man) to move the tank to the side.

Yet to pull a shot, trying to run a few rounds through the service boiler, found a bit of tiny dust/ground in the water???, this is a demo machine so it’s used before, 25 shots total. but first performance impression - even at 130*C, the steam is noticeably stronger than Elizabeth at 140*C :o

« Previous Page Next Page »