https://www.youtube.com/watch?v=_Tn84Gp_xcQ Any thoughts? How would you use the new function? @"DavecUK"#1 is there any way you could test the new V3 of the Bianca?

Thats a very good feature to add, wonder if rrp will be effected.

@"RobertRo101"#p9667 I've been using the V3 for almost a year now…low flow works well. Especially good if you don't want to move the paddle..It was one of my favourite new things on Bianca. For the upgrade you would need a new LCC, some wiring and the additional solenoid with a slight plumbing change.

@"DavecUK"#p9673 I was certain that you would have had this verision already:) can you share any info if you are going to update the Bianca review on your website or post a video about some testing with the new future? Are there any more updates we can expect?

> @"RobertRo101"#p9674 update the Bianca review on your website or post a video about some testing with the new future? Are there any more updates we can expect? The Bianca Review is a version 1, so quite old now. I may well update it…essentially the machine is unchanged except for the addition of the new features. I may have a few extra features the production version doesn't have, and my solenoid is slightly different (they are sending me a replacement, if I get any problems with mine)… I was originally sent it to try it and see if there were any problems…which there were not…it wall worked very well. I don't think I have a manual, but I will download the production manual as my version a year ago has something else I won't mention, until I find out if it was in the production version. I suspect my software might not be exactly the same version, but again until you guys by one and if the software version is on the back of the LCC I won't know…plus mine could still have been a reflashed LCC. I have to be very careful when commenting on pre production stuff so early in the chain. Really like the version 3 though, as compared to the version 1, lots of features were new….and I do need to update my version 1 to a version 2.

This is why, despite my recent challenges, I really love the Bianca (and Lelit). I have been toying with updating to LCC 2. I may hang fire and update to LCC v3 though, with my new found boldness for tinkering with the machine 😉

The Low flow used in conjunction with PI seems to be a good combination. Dave, have you been using just the low flow or do you always use the PI with it ?

Really great feature. It basically mirrors the profile I use 99% of the time so it’s handy to be able to automate it. It’s also really awesome to see Lelit iterating on what is already a fantastic machine. It’s impressive how quickly the group head pressure changes when the low flow kicks in.

this is awesome. i'll get an upgrade kit when its available.

Its a good option, not sure id rip my machine apart for it, but its a good out the box incentive to buy the v3 over a competitor

there will hopefully be some other upgrades that the new LCC bring that are worthwhile.

Lelit Bianca V3

DavecUK

Barjee I can’t honestly remember, probably not. In fact, I’m sure I have not.

simonc

New Bianca v3 owner, coming from a Minima where I’d leave it on all day but with steam boiler off and only turn on when required. A smart plug turned whole thing on and off.
As it’s more fiddly to turn the steam boiler off, am I better using the standby mode and accepting waiting for it to reheat when shot required as I do need to steam?
If I disable standby and have steam boiler on for 8 hours a day do I risk scaling? I use a zero jug and just some bicarb.

MediumRoastSteam

simonc As it’s more fiddly to turn the steam boiler off,

How so?

Rob1

simonc If I disable standby and have steam boiler on for 8 hours a day do I risk scaling? I use a zero jug and just some bicarb.

No..but don’t do it anyway.

simonc

MediumRoastSteam there’s a big switch on the minima for the steam boiler. Steam milk, flick switch off. No clicking through a little digital screen.

MediumRoastSteam

simonc No clicking through a little digital screen.

Hold the minus button for 3 seconds and that turns the service boiler on and off, as far as I know.

simonc

MediumRoastSteam ah. Joy of a minimal manual. BB no longer providing Dave’s extended manual

Waitforme

MediumRoastSteam

Must try that on the V2 this morning, it’ll be easier than clicking through the menu.

DavecUK

simonc ah. Joy of a minimal manual. BB no longer providing Dave’s extended manual

The hours that went into my extended manuals, just not willing to do it now.

MediumRoastSteam

simonc - yeah. The manual is quite basic. I don’t know why they don’t state such a useful shortcut.

simonc

DavecUK it was much appreciated on the Minima.

simonc

MediumRoastSteam I presume I use the steam pressure gauge to know that the steam boiler has got up to temp/pressure as the current steam temperature isn’t show.

MediumRoastSteam

simonc as the current steam temperature isn’t show.

Or you can press the + button once to show the actual temp, and again to show the steam boiler temp. 👍

simonc

MediumRoastSteam thank you. Totally need all these shortcuts documented.

Cuprajake

For me it was quick enough to warm up not to need to leave it on all day, esp if you add a WiFi plug 👍👍 saves electricity too

MediumRoastSteam

Disclaimer: I don’t have a Bianca, and I am assuming the LCC functionality is similar to the Elizabeth’s. I also read on HomeBarista that the “hold the minus button for 3 seconds” works for the Bianca.

Waitforme

MediumRoastSteam

Tried it this morning, works on the Bianca V2.

3 years of prodding through the menu no more , thanks. 👍

MediumRoastSteam

Waitforme Wait… Didn’t you have an Elizabeth beforehand?

Waitforme

MediumRoastSteam

Nearly, you talked me into a Bianca 😂

MediumRoastSteam

Waitforme Nearly, you talked me into a Bianca 😂

3 years on and you are still with the machine. I must have done something right :-)

« Previous Page