- Edited
https://bunafr.com/home-coffee-roaster/
Looks very much like an Ikawa… Batch is from 50g to 250g…. Cost is around USD $899 + shipping and taxes.
Looks interesting… And it is “smokeless” (haven’t I heard this before… LOL)
https://bunafr.com/home-coffee-roaster/
Looks very much like an Ikawa… Batch is from 50g to 250g…. Cost is around USD $899 + shipping and taxes.
Looks interesting… And it is “smokeless” (haven’t I heard this before… LOL)
MediumRoastSteam If it does all it claims and can really roast 225g, might be an interesting product. All in it would be almost $1170 or close to £1000 Concerns would be:
They had me at “hyper fresh”.
DavecUK we pretend to be a 230V country when in fact we are 240V w
Well, the pretence must run pretty deep, as the median voltage is currently 232v in the UK. If you’re beyond a power stations direct catchment outside of peak hours then you may even be below 230v, but if it’s 0850 on a weekday morning and you happen to live over the road form a gas powered station, you’re possibly getting 250v~.
I recently did some voltage/usage logging for a plastics factory and they had a swing of about 18v (I seem to remember). They are now forking out tens of thousands of pounds on voltage optimisers.
My PV grid monitor has had a variance of 11v today.
Some parts of the grid use capacitor banks to try and keep voltage more consistent.
A 5% voltage variance on a heating element is at worst, negligible, unless it’s a highly precise heater it’ll vary in terms of output based on the added resistance while under load.
But anyway, subscription services are, in my opinion rarely good value!
Del_UK Well, the pretence must run pretty deep, as the median voltage is currently 232v in the UK. If you’re beyond a power stations direct catchment outside of peak hours then you may even be below 230v, but if it’s 0850 on a weekday morning and you happen to live over the road form a gas powered station, you’re possibly getting 250v~.
Del_UK A 5% voltage variance on a heating element is at worst, negligible, unless it’s a highly precise heater it’ll vary in terms of output based on the added resistance while under load.
There is a difference in temperature and there might be an effect on airflow, this can make things very bad, as it did for the Gene Cafe. I had to ask genesis to rework the heating element for UK, hence there was an actual element built for 240V.