You can remove it from the bottom but often it is difficult to remove the steam tip (no flats) ?
I doubt the wand/ ball is thread locked, mine certainly is not.
The cool wand liner just fits into a recess in the ball joint the same as the steam tip.
Lelit Elizabeth - creaking steam wand
Elcarajillo You can remove it from the bottom but often it is difficult to remove the steam tip
On the Elizabeth, at least, the steam tip is very easily removable with fingers. no tools required. I remove mine all the time for cleaning. 👍
I thought about the tip, but didn’t want to risk messing with it. However, i have just tried and, indeed, it unscrewed quite easily. That will be v. useful for cleaning!
How on earth do you quote another post on here? And @ someone? Can’t figure it out… do you need to be on a computer?
DavecUK why all this talk of removing the steam tip?
Dave, read on from this post: https://coffeetime.freeflarum.com/d/253-lelit-elizabeth-creaking-steam-wand/18
europa How on earth do you quote another post on here
Highlight what you want to quote. Click Quote. Repeat as many times as you wish. ;-)
MediumRoastSteam Dave, read on from this post: https://coffeetime.freeflarum.com/d/253-lelit-elizabeth-creaking-steam-wand/18
europa How on earth do you quote another post on here
Highlight what you want to quote. Click Quote. Repeat as many times as you wish. ;-)
If you are on a phone, highlighting then clicking the quote option that comes up also works.
Ah I see…me I’d probably initially ferret the o ring out to check it before removing the tip/ball
Vid may be useful to op
- Edited
Well, i removed the o ring and verified that it is in good condition. I greased it and the ball (as per the vid) and put the wand back - i don’t find it necessary to turn the machine upside down!
I will test when it’s hot tomorrow morning, but, right now (cool), it still creaks. The only thing i haven’t tried is to file the top of the spring. This is looking like one of those things I’ll just have to live with lol.
- Edited
europa The spring shouldn’t be moving? I watched the vid, could just be spring bending and rubbing the sides, try lubing spring.
12 days later
Quick update:
After trying everything i could think of, I contacted Bella Barista and sent them photos and a video. Their reply was:
“From your video the noise appears to be mostly spring noise and all wands make an amount of noise when rotated or moved its hard to tell from a video if this is excessive and apart from greasing it I cannot offer any other solution as nothing looks badly worn or damaged.”
Would you guys agree with that?
europa Would you guys agree with that?
Pretty much yes….I’ve had other machines where the spring in the wand creaks
europa - I would not worry about it. Specially if the machine is cold. I can barely catch a glimpse at the start of your video, for a split second, of the machine being in “eco” mode.
@MediumRoastSteam
I keep the machine in eco mode and switch on the service boiler at the start of my workflow. Nearly all my drinks are milk based.
But, yes, the noise is not a massive deal. Right now i have bigger problems, namely the OPV issue (which ive only just noticed)!
europa -
😞 - this must be incredibly frustrating. I was reading on the OPV issue thread. So disappointing.
MediumRoastSteam Agreed!
europa - Just as an update, I checked mine. Admittedly it doesn’t creak as much as yours, not when it’s hot at least. But it does make noise, and it’s also depending on how I move the wand too.
Now that I think about it, when I had my Pro-700 it made all these creaking noises and I never thought much of it.
a year later
This is all a bit of a puzzle to me.
Ihavetwo Elizabeth’s, both bought from the same supplier in France about 4-6 weeks apart. I use one in UK and one in France.
On the French one the wand moves very easily whether hot or cold and there is no noise or roughness felt while moving it. On the UK one the wand is quite stiff to move but doesn’t creak. No difference whether hot or cold.
I will have a look at the seals and spring on the UK one when I get back in July and see if lubrication will help. The difference is odd as they are both only about 6 months old and have been in use for about 3 months each so far.
Maybe it might be worth asking Lelit for advice. They respond very quickly to queries and usually offer very helpful advice. They might even have a short video on this problem or might make one if they get several queries about it.
Lelit Elizabeth (2) , Eureka Oro Mignon Single Dose, Mignon Mk2 (converted to single dose), Aerolatte Mini grinders(2), cafetières, Bodum K1218 Vacuum