Curious what flow rates those with flow control devices are getting (if you something like a Bianca) or are using (if you have something with unlimited range).
I just installed the LUCCA flow control on my Quick Mill Vetrano 2B Evo.
Tha Lucca flow control is similar to the Bianca in that it has a limited range of motion, as the paddle touches the machine on open and closed. Although it’s not as infinitely controllable as other flow control devices, I prefer the usability and predictability of this style.
When I installed the flow control so that all the way to the left was fully closed, I was only getting about 4g/s flow when fully opened. This seemed too slow and limiting for a rotary pump machine, so I have since adjusted it to get ~2.5g/s in closed position to ~7.5g/s in the fully opened position. Stock valve was pushing closer to 9g/s.
This seems like a pretty good usable range, but I’m curious if I should be skewing toward higher flow when fully opened, or lower flow when closed?