DavecUK Man, I really do have covid brain. Yes, zero on the group pressure gauge. Meant on the front panel gauge.
I am using the stock water filter that the machine came with, which is on the pump inlet hose. I also have an in-tank softener as well, and the tank rubber gasket for the lid is intact.
DavecUK The issue continues, and I have noticed that the pump sound changes when it finally makes pressure. I tried removing those and no luck. I’m going to try to get a video tomorow am. It kicks on with the smart plug, preheats for about 45min and then I try using it when I wake. I leave the flow control open and lift the lever all the way, it rockets up quickly to 9bar then falls down to 2 bar. If I put a backflush disc in or close the flow all the way and lift the lever fully, it runs and runs and the pressure just stays at 2bar. If I raise and lower the lever several times, the pump noise eventually becomes louder and it then makes pressure. ECM has not responded to my email at all and its been over a week. I don’t know what else to do, thoughts?
MetalDave been over a week. I don’t know what else to do, thoughts?
I’ll wait for the video, but it does sound like the pump just might be faulty….
https://www.ebay.co.uk/itm/385654757570
Just buy this for £17 and fit it…if it doesn’t improve things, at worst you have a spare pump.
MetalDave Herein is where the problem arises, and, unfortunately - the distributor is less than helpful (And I still have not received a response from ECM…)
You’ll need a 110V pump. Just be well aware that, if you replace the pump, it’s very likely you’ll void the warranty too. Appreciate the distributor not being helpful, but I’d at least try to get their consent in writing first.
MediumRoastSteam I have sent ECM four emails as well and they are completely unresponsive aside from the initial “we received your message” response - its been two weeks.
@DavecUK I was able to get a video of it this morning, heres a dropbox link:
My very brief experience in sending emails to ECM was the same. But then, to my surprise, the retailer here in the UK phoned me up (they joined the dots) and the matter has been resolved - took months though.
I believe ECM has bigger fish to fry as they say over here :-)
Lelit on the other hand… Back in 2020, when I interacted with them, their customer support was excellent.
MediumRoastSteam I heard ECM was reputable, I’m beginning to regret buying this - two dud machines in a row, and the company doesn’t respond - but if I fix it myself, warranty is void. Thats a pretty raw deal for almost $2k USD.
In all honesty, your reseller should take more accountability and responsibility as the warranty is with them. The fact your reseller is unresponsive is far from ideal.
It’s quite unfortunate that you had two dud machines - and I understand how frustrate you might be as you have technically expected ECM to be more of a premium brand. However, to be fair to ECM, the pump having an intermittent fault is a very difficult one to spot in QC.
MediumRoastSteam Agreed, the first machines bad OPV seems like it would’ve been easier to catch. If you and/or @DavecUK can watch the video in the dropbox link, please let me know your thoughts on the issue, and if the pump seems suspect.
I did get it to work eventually (and I had to download it), honestly it’s easier to put on YouTube as unlisted!
The pump sounds a bit like it’s running against a blockage, but even then the sound is a bit quiet, definitely not running dry.
Is water flooding out of the expansion valve tube leading back to the tank? If not then you should try a new pump. I should add a little water is quite normal.
ECM won’t really get involved because your warranty is with the Retailer and they should resolve the problem.
MetalDave - Now… That’s weird. That must be incredibly frustrating.
When you activate the pump and there’s no pressure registering in either gauges… Is there water going back into the water tank (you can see water going back into the water tank towards the end of the video - but then the gauge was registering pressure).
MediumRoastSteam @DavecUK It didn’t do it this morning, so I am not certain, but I do recall water coming back into the resevoir. I will check again when it recurrs.
MetalDave It didn’t do it this morning, so I am not certain, but I do recall water coming back into the resevoir. I will check again when it recurrs.
It depends how much, some at 9 bar is normal as it bypasses to maintain the pressure, gushing out with 2 bar isn’t.
MetalDave None at 2 bar, steady at 9
I really think it might be a faulty pump….video might help with the diagnosis, or for £17, get a, Ulka pump and fit it.
