They started shipping them today. Anybody kickstarted it? ![A zero waste coffee grinder - engineered to the precision of a Formula race car. Literally.](https://ksr-ugc.imgix.net/assets/033/083/609/57fe7dfb9833c595341b7f015564c4aa_original.jpg?ixlib=rb-4.0.2&crop=faces&w=1552&h=873&fit=crop&v=1618172524&auto=format&frame=1&q=92&s=1075a8fbb5057244b2b2d499568e9260)

I am in lust. Would have been very very tempted had I seen that on Kickstarter at that price. Am sure it will be a lot more retail.

I considered getting this, but it being battery powered put me off to be honest. Does look beautiful though.

They're still available on indiegogo. Looks beautiful I agree. I'm waiting for early reviews as beta testers reported some issues like grind retention in the funnel, excess static, etc. Then if those are fixed to convince myself I need to upgrade on the eureka…

Battery powered?! How was that determined the most appropriate course of action? I appreciate 3kg per charge is probably about 3 months for most people but still… As above, it’ll be interesting to see how it deals with the usual grinder related complaints like static and retention.

Well i wouldn't worry about battery, have you seen an sds drill go through concrete 😂 Its a stunning little grinder, while not a fan of the sweepers, remind me of cable ties .. But it could be a little gem.

> @"Cuprajake"#p14108 But it could be a little gem. Isn't it a belt drive? I also remember the praise being heaped on the Lagom Mini, so it's best to actually see what it really does.

@"Cuprajake"#p14108 Your point about the drill got me thinking… Presumably if it’s not running on constant voltage, as the battery wears down the motor rpm will reduce, as with a cordless drill? EDIT: I just read the blurb and apparently it uses an ‘intelligent battery management system’ to regulate the power to the motor so it’s consistent as the battery drains. I wonder if the cordless approach was to avoid having to consider different voltages worldwide and ship the same product globally.

@"Ernie1"#p14125 It's an induction motor I think, so shouldn't slow down. my concern would be about the batteries…are they replaceable, did they use 18650 cells etc.. as they will have a limited lifespan. They have not stated the grind times by speed ranges either?

@"DavecUK"#p14127 Indeed, interesting they specifically talk about sustainability being ‘top of the list of design priorities’ but then use a disposable power source.

> @"Ernie1"#p14129 Indeed, interesting they specifically talk about sustainability being ‘top of the list of design priorities’ but then use a disposable power source. I guess they wanted it to be portable…the main thing to find out, is what they are not telling you! It certainly looks nice.

Kopi Deva

simonc

Great. I’m excited, just 6 months to wait!

simonc

simonc well this is disappointing as a review. I guess Brandon’s sister drove it to them and waited and took it back. doesn’t sounds like they used it much and sadly no detailed review of workflow, cleaning etc.

https://youtu.be/RX7ioj1n1c4

FadedFrontiers

simonc agreed, anyone could tell you how slick it looks!

DavecUK

simonc I wish he would stop all that hand waving…very distracting.

Tjyven

As I think I have written earlier in this thread the only thing I dont like with the machine is that you need to press on/off a few times to get all the grinds out. Doesnt take long time but still.. And by doing that it is really low retention, usually very close to zero.

simonc

The Indigogo campaign has shipped and the retail price is going up from £750 to £1200 at the end of the month in case anyone was considering it, you should order soon.

Cuprajake

Also saw this, quite the increase

Will put slot of people off as it’s already hardly talked about

DavecUK

Cuprajake Will put slot of people off as it’s already hardly talked about

I may be getting one to play with next month.

MattH

Hitting the top end - lots of choice for that money( or less !)

Tjyven

I bought it when the price was £459+tax and I think that was a really good price but with this new price there are many really good grinders to compete with.

simonc

So after a 9 month wait, mine finally arrived this morning… except it doesnt work. The motor spins when I turn on the switch, but the on off button does nothing.
I have emailed KD and hope that there is a simple fix. It’s been a long wait and was excited to try it. Guess I am waiting a few more days now.

dfk41

simonc Sounds like an In Transit problem. Hopefully it passed QC before it was sent and is no more than a loose connection

simonc

dfk41 Yes.. there is coffee in the chamber so clearly it ran and was tested, so likely a transit. Clare just emailed and explained how to check the button and can send a replacement if needed. Thankfully they are only just down the road so hopefully won’t take long to get here.

Cuprajake

ive heard of this before, happend to someone else

simonc

Waiting for confirmation on which terminal to put the blue wire back on to.

spivechild

Sounds like they’ll get it fixed relatively quick. Hopefully just a small hiccup in an otherwise great grinder based on my own experience.

Cuprajake

from the marks id say middle , but wait for confrimation

simonc

Cuprajake I was going to guess left, but you were right. I waited for confirmation… support is amazing, only 20 mins for a reply.

The white plastic behind the blue cable connector is supposed to be attached to the plastic zip tied near the left terminal which is a battery support, but in transit it obviously broke when mishandled. Makes you realise what happens with the couriers.

Now to get on with seasoning the burrs..

MattH

Looks nice and tidy in there 👍 - sure you will be up and running shortly !

simonc

Also discovered that cold starting doesnt work for espresso setting.. nothing came out and had to drop 2 notches. But with a hot start all good.

« Previous Page Next Page »