Lever Machines

thanks David. Will get onto Maria in morning 👌

like an arcade in Blackpool!

Hi Adrian: My Craig Lyn Funnel II is packed away in the garage. My reasoning on why this is not a great funnel for our baskets is based upon the diameter of the opening of the Funnel II. It is designe...

similar train of thought: that was one of the reasons I wanted to try a Matrix screen - the column of water needs to build to break through the barrier, at which point distribution from the sleeve isn...

I have preinfusion currently set at 2.6, but will experiment with that a bit. I gave 5 seconds a go this morning, and yeah, that seemed to slow down the extraction a little 16.5g with 2.6b preinfusion...

totally forgot about that 🤣

I totally agree. Quite enjoyable to mess around with. It is hard to deny the nice mechanical feel of it all. Satisfying in the same way that driving a proper manual stick shift is. I envision I’ll use...

So, on the v2 that is the “exhaust” path from the system once the dump solenoid opens… V1 doesn’t have a dump solenoid so very little water from that outlet. I have had both and been plumbed in on bot...

I’ve tried with just the flush lever and the group lever , but didn’t bother to try and compare flow rate changes between them. I can try tomorrow, although I suspect my measurement accuracy may not b...

I roast the same half a dozen beans regularly. I keep records of grind settings for each and just go to my starting point on the P64 for each bean. It is very repeatable and gets me pretty much 18/36 ...

probably the Evo2 is more rigid now, as there is quite a bit more thick steel and extra bracing behind the group….plus 3mm thick stainless rails underneath the body. In reality though neither noticeab...

Even for four cups a day, still this was the right decision 😀

I’m leaving for a meeting just now and tomorrow I’m going to England very early, so not sure I will find time to take and post any picture before Monday. But thanks already for your detailed answer. I...

@Danijeljl Id agree and have said the same to people with ecm synchronika and flow control. I would tell them turn flow control 1 and a ¼ turns open and leave it alone . Because on the synchronika thi...

😁

Ah you don’t have a memory metal vacuum breaker, looking at the top of the boiler, it’s almost certainly leaking.. You have 3 options press the centre post down with a wooden spoon to try and steam cl...

When I removed and refitted mine, as a testnnmthe round bit came off with the gauge.

Mine has a bespoke dosing ring

Admittedly the argos won’t win any design awards!

I’m sure it’s just an exhibition centerpiece.