LMSC or the room stat is faulty and firing up the boiler. Your engineer will sort it out. If it’s a simple room stat won’t be very expensive.

I keep meaning to change my Drayton controller for a smarter version and pop in a new stat. Just haven’t got round to it. Will do it next spring now…just in case 😁

    DavecUK It’s been on an extended life since 2014. We were told the boiler was almost new after a lightning strike in 2014 took out a few. Since then, we replaced the expansion valve in 2019, Hive Smart Stat (new version) in 2018 after a neural fault on our development and Drayton Zone Valve actuator last year. Let’s see what the issue is this year! 😃

    DavecUK smarter version a

    What do you have in your mind? I want the next upgrade on the pencilled home automation system and/or Apple Home Kit!

      LMSC I just want a controller for the boiler that I can connect my phone to as well as a simple room stat that I can also connect to. Not a behive or a wasps nest or anything like that.

      LMSC No. It’s dumb - no web access and no app. Just plug it in and view data on the screen. That’s why they are a tenner!

      • LMSC replied to this.

        Gagaryn That’s suits me well! 😃 Thanks

        Edit:

        Ordered!

        LMSC
        I had to replace a Y plan zone valve on my hot water this week as it was constantly demanding hot water from the boiler, but the boiler wasn’t asking for hot water.. Essentially the relay in the valve had died so the switch out (orange cable) had failed closed so was outputting 230v to the water request part of the circuit.

        This made the boiler run 24/7 but with no water flow going out it was not using much gas.

        • LMSC replied to this.

          Del_UK Thank you! Very helpful mate! We will be calling only a Gas Engineer today. We will leave it for the person to sort out. Thx

          CoyoteOldMan I am with Coyote on this, presuming there is a 2 / 3 way motorised valve. They can be prone to sticking/ seizing in one position ,it could be as simple as changing the head or possibly the valve.

          Called out an engineer, who is expected to drop in, hopefully, some time next week! Jeez, All of them are booked 6-8 weeks ahead!

            @LMSC didnt you know the economy is goosed…..

            Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -

            • LMSC replied to this.

              LMSC Imagine trying to get a heat pump one out. For a gas boiler the most you pay for spares/fix is closely related to the cost of a new boiler. I expect heat pump repair costs will have a similar relationship.

              • LMSC replied to this.

                Cuprajake I had called about 10-12 of the local guys in a radius of 5-6 miles, and found just one agreeing to pencil us in for next week. I haven’t told this person it is Hive, as a couple of the other guys advised they won’t touch it as it is messy to deal with! 😳 🤞

                Normally, these guys are busy at this time of the year. One of them was saying it is busier than normal this time. I am thinking if the energy crises have contributed to this.

                DavecUK Imagine trying to get a heat pump one out.

                Perhaps, one may have to wait for a a few months including a freezing winter time at home! 😳

                  LMSC Perhaps, one may have to wait for a a few months including a freezing winter time at home! 😳

                  Worse with replacement heat pump costing 6K and another 1K to install it..2.5K+ repair bills will be something that will become more common.

                  All for a device that has a probable build cost of less than £800 and a retail price that will only increase once they are mandated. You know there’s something wrong when a member of the HOL stated the only way to get people to buy heatpumps is to ban gas boilers. So “they” know people don’t want them despite a massive push in disinformation trying to persuade people.

                  Well the temps really dropped now, I got some small thermometers to put in the bedrooms and living room

                  The thermostat says 17.5 for the hall, the bedrooms are around 18,

                  But this is were my moral dilemma comes in. My little girl said she felt cold. So my plan is to keep the house at 18.

                  For me this is a right cunts trick that in the modern world, where people work fucking hard, we are living cold, paying more than we ever have to just survive.

                  Wank all round!!

                  The people that run the country are sooo far out of touch with people. It’s in true

                  Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -

                    Cuprajake But this is were my moral dilemma comes in. My little girl said she felt cold. So my plan is to keep the house at 18.

                    Remember what advice we were given, she needs to do some star jumps! 😁

                    There’s also the warm hubs…..

                    P.S. Once people realise this, and worse, will be what net zero looks like, perhaps they will protest

                    Against the law soon to protests.

                    I see the chancellor is trying to remove the bankers bonuses caps…

                    Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -