Gaggia woes

The force tamper pisses all over the normcore.

I know I’ve owned both. The normcore still has wiggle room the force tamper gives perfection everytime.

See how even when flat it moves.

The force has a lip that sits in the rim,the build quality is night and day

Imo normcore are just cheap stuff

DrForinor You will need a tamper if you do not have one. I assume you have one with your Gaggia. But if not, a simple tamper such as this one will suffice. It is similar to the one I have.

https://clivecoffee.com/products/lucca-espresso-tamper?variant=40068700700760

@DrForinor i think you have to value how much a minor amount of additional convenience is worth vs the question of could it be better. I’ve used the Sage Oracle a fair bit, and it certainly gives decent coffee as good as a coffee shop.

The few downsides I see are:

• single dosing isn’t that great and I think you get a fair bit of variability if you do it
  • obviously this isn’t an issue if you’re happy to just fill the hopper with a single bean, but in that case I’d worry about it going stale as it’s not airtight, doesn’t keep out light and gets warmed by the machine.
• milk texture is good for cappuccino (loads of stiff foam), but in my opinion not as good for latte/flat white. It works by a pump injecting air in (rather than it being pulled in at the surface), and I don’t think the bubbles end up quite as small or as well incorporated.
• the convenience makes it too easy to make ok coffee vs great coffee (that isn’t much extra work)
  • the autotamper means you can’t play with dose, you just take what you get. You’ve also got no idea how well distributed and tamp free it is.
  • while you could weigh every shot, run it manually so you can stop at the target volume, and tweak grind settings to keep it where you want, it’s too easy not to. In practice you tend to just hit the double button (runs for a set time) and get what you get, only adjusting if it’s really miles off. It’s very hard to tell the difference a difference of 10g in the bottom of a cup, but it makes a massive difference to the quality of the drink.
• I don’t think it’s built with repair in mind, so expect a lower lifetime. It’s really a kitchen appliance that’s trying to compete against bean to cups.

Overall though you definitely can make great coffee if you take the time and effort, and could lift the quality even more with a separate grinder, but you probably won’t.

One area where it does really shine though is if others need to use it. It’s a lot easier to show someone than doing it all manually.

Any machine can’t make beans taste better than they are, they can only extra what’s there, so once you’ve reached the level of an Elizabeth (or other equivalent), it’s really diminishing returns and you’re probably better off spending the difference on better beans.

Enjoy the deliberation 😀

The Bravo tamper is worth considering too. Self levels against the basket and uses spring force for consistent pressure.

Great choice

DrForinor Sounds like you’ve made the right choice for you. You’ll definitely be able to get some great coffee. Enjoy

Yes, as an Elizabeth owner myself I concur. I went for the Elizabeth as a very capable machine that had all of the necessary elements to produce top line coffee and milk drinks. I felt when I purchased it that it was the least expensive option that had all that I wanted. It has not disappointed at all. In fact, the more I use it, the more I appreciate so many aspects of the machine, from the easy programming, mighty boilers, easy cleaning, and small footprint compared to so many other dual boiler machines. Add a great company in Lelit and great online help such as this forum and DaveC’s documents, and it has done it for me. I will not “upgrade”. This machine was the upgrade I needed.

DrForinor If you really have cash burning your pockets, I can send you my bank account details.

I’d start with keeping the SPTK, and see how you get on… but if you want a Niche right now, here’s the link: https://www.nichecoffee.co.uk/products/niche-zero

You will see a step up, in grind.

But

I would play with the grinder you have for now, learn the machine, and then upgrade. Take your time

It can do the job

Brilliant news can’t wait.