Sworks one off shower screen for ACS

RRaja123 · 5 Mar

Cuprajake The rationale is that during the wetting phase, areas where water first hits the puck will present lower resistance to full infusion pressure (for reference, this is one of the reasons the Decent crew have released a new set of shower screens). I’ve observed that in situations where the initial water distribution isn’t uniform. How much one cares about that is as variable about opinions on color, heh.

The good thing is nobody is being forced to buy it. It’s an option that some people will choose over the others.

RRaja123 · 5 Mar

Adrianmsmith Yeah I have one of those. It’s a nice tight fit. Can’t say I enjoy the installation tho.

LMSC · 5 Mar

FWIW, I use the stock shower screen with GU10. It a tighter fit than with the IMS. It served me well for almost 4 years. Each to their own. 😊

RRaja123 · 5 Mar

LMSC yeah im using the stock screen also. Mine tends to get angled with the GU10 spring, so I switched over to the circlip Adrian kindly linked. I find the install is a bit fiddly (as Jake said above), but the distribution is pretty good. I might check out the Sworks screen if it simply screws in. Dont mind throwing that in the sonic bath once a week, and cleaning the piston head.

Cuprajake · 5 Mar

What you really need is 2 ims screens

Or

Tiny curve in the screen works too 😅

RRaja123 · 5 Mar

I’d like to try a Matrix shower screen somehow. It needs a seal, tho.

JJason1wood · 5 Mar

Cuprajake what I really need is an ACS to try it. 🤣🤣🤣

Cuprajake · 5 Mar

I thought shower screens had been debunked

Adrianmsmith · 5 Mar

Raja123

The trick to installing them…..

Sit on a chair with shoulders approx level with the shower screen location

Put circlip on a flat surface

Insert pliers, Open pliers slightly and Pick it up , ensuring pins are flush to the surface of the circlip, thats important.

Insert shower screen with other hand with one finger holding it.

Swap finger as you offer up the circlip, locating circlip at back edge. Use the free hand now to press on the circlip near the pliers pins, pushing it in position. Release pliers.

15 seconds max 😎🤪

Adrianmsmith · 5 Mar

Jason1wood

But, but, but you rejected that suggestion some weeks back ,🤪

Adrianmsmith · 5 Mar

LMSC

Half the fun of the hobby is messing with things, messing some things up and replacing them etc 🤗☺️, to me anyway!!

JJason1wood · 5 Mar

Adrianmsmith got to see DFKs leva and realised it’s not as big as first thought

RRaja123 · 5 Mar

Adrianmsmith If only things were this simple every time, Adrian. Accidents happen, fiddliness is still there. Does everyone enjoy that in the same way one wonders ;)

RRaja123 · 5 Mar

Cuprajake Try telling Decent that, heh.

For example:

Cuprajake · 5 Mar

Jason1wood ohhh matron

Cuprajake · 5 Mar

Raja123 yeah i agree to an extent,

But what happens when we introduce paper or mesh filters on top of the puck

While the decent shower screen is £17 that’s worth a punt, cant imagine the cost if the sworks for the evo, but then the evo can have triple the flow so dunno now much difference that makes at those fill rates. , 2seconds and the puck is over 2bar.

Adrianmsmith · 5 Mar

Jason1wood

His acs evo is also guite small for a domestic environment ,🤪🤭

RRaja123 · 5 Mar

Cuprajake at this level, it seems to be more about reducing variables. Some people will pay more for that than others (hence a lone person originally commissioning Sheldon). Those that will pay don’t care about cheaper solutions or DIY workarounds.

Cuprajake · 5 Mar

Very true,

Just get to a stage where you are chasing your tail in my very humble opinion.

RRaja123 · 5 Mar

Yes. It usually comes down to that. Here, it seems to be centered around d convenience of removal for some, and a potential better distribution for wetting (not to be confused with rate of fill and soak time). Add the hobby and willingness to experiment on top, and Sheldon has enough to sustain a bespoke biz.