Vesuvius Pressure Profiling Machine - General Discussion

kautivo Out of curiosity, have you shared your observations with Paolo Cortese? What does he think?

John_Yossarian Yes my friend he knows the progress, he also has helped with the way for connect the pipe directly from valve water distribution to brew boiler!

I think the most people are using his Vesuvius only for espresso and if they have the steam boiler off so they can’t see the fail, for other side i would like to know if really somebody use HX function….

In my humble opinion the machine needn’t this option.

I will follow detailing…

prezes An update that you may be interested. After a little experimenting with my Vesuvius, I discovered something. My normal routine had been to just purge the steam wand long enough to get the water out. Even though the pressure and temp looked good shortly after this, it would drop down to an anemic 0.8bar. But then I noticed a more vigorous steam pressure as I was cleaning things up. So I changed my routine to purge the steam wand for a solid 8 seconds before I pull the shot. Once I begin steaming after the shot is pulled, I can always maintain a 1.1 or 1.2b through the completion of the steaming process.

This is going to come across as an odd question but how many Vesuvius V10s do you reckon are in the UK?

Ratty2000 This is going to come across as an odd question but how many Vesuvius V10s do you reckon are in the UK?

Dunno? Probably not a huge number.

I plan to pick up a 2019 Vesuvius at the weekend, seems great value as a used buy given it’s capability and spec. Assume this machine is still relevant in 2025??

Are ACS planning to continue to support the Vesuvius with spares for the foreseeable future?

Any tips for this machine? Anything to check on inspection? I am coming from a Fracino Cherub HX machine, so a simple but reliable E61 style machine . I know ill need molykote (111?) for the cam lobe, post back flush etc. Anything else?

Thanks

Tal I plan to pick up a 2019 Vesuvius at the weekend, seems great value as a used buy given it’s capability and spec. Assume this machine is still relevant in 2025??

If someone told me “this is the only machine you are allowed to use hse from now on……”

Id be more than happily drinking coffee daily.

It was ahead of it’s time in 2019!!

I basically programmed mine to mimic the lever as i guess a lot of people do .

You should be more than happy.

Yes molykote 111 should be used when servicing the group. It stays put a long time and lubricates well.

With the servicing…. Less is more sometimes!!

Of course the first thing I’d do is remove the cam, “preinfusion chamber” (which isn’t really in this case!) and mushroom for a look and a clean but i like messing!!

I usually soak everytging in cafiza to clean it once off the machine .

We require pictures ,😎😝

Adrianmsmith

Hey Adrian, what are the profile steps for that lever-type shot you are pulling? Looking to occupy the last profile slot I have.

Cheers,

Andy

Adrianmsmith

Appreciate that, it is on the other forum, looks in good condition and well looked after, so fingers crossed all goes well!

Collecting it Saturday morning when he heads down to my neck of the woods to visit family. Certainly seems like a good deal. He has shared videos and all looks to be in great condition etc.

Can’t wait for it. I will revisit some lighter coffee once I’ve played with some pressure profiles of my usual espresso coffee choice. The Fracino while superb for my medium/dark choices, I don’t have any control on temperature or any other parameters to try and improve light/medium level roasts. So I’ll see if the additional control and more variables allows me to enjoy them how the rest of you seem to!