HX Machines

The discharge into the driptray should be only from the vacuum breaker, if yours is a lelit MaraX is it a very early one, as those did discharge from the expansion valve into the drip tray and you sho...

They’re local to me but I only fairly recently visited for the first time, I’ve not purchased any equipment but I’m really enjoying trying their beans. The bonus is that you can set up an account for ...

that’s perfect - exactly what I needed thanks Neil

Hello opiop. Yes, I got mad with this too but finally found the right tool on Amazon. It is this one: https://www.amazon.com.be/dp/B001550BDK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 size to select is 5...

good call, I think it could possibly be where the hose joins the spout, no idea how to get to it from the back though as it’s really quite tight! no leaks underneath the machine, other than when the w...

Hi, just an update from my problem. It was related to microswitch 9600080, Lelit Care sent this video: In my case some leaking generated oxide in the contacts: Cleaned with isopropyl alcohol, no need ...

Sorted!! Many thanks for all the help with this.

Thanks for the links :-).

You could always get an ECM Puristika.

Small update in case anyone runs into the same issue, the hose connected to the pump had a slow leak after this mod- I suspect I was a bit too keen separating the hoses from the connectors- new silico...

Hi everyone… :) This is my first post, so just wanted to say big hello to all of you. I recently purchased for cheap Quick Mill Andreja E61 machine, couldn’t take away from the offer…my old Gaggia Cla...

I think the machine is behaving normally now. Did a full descale and now my Mara settles between 0.75 and 1.25. I can hear that the boiler is ticking over every so often rather than coming on full pel...

Dave, thanks again. I took the top off this morning and it’s definitely the vacuum breaker,. As it’s heating up and getting nearer to boiling point the vacuum breaker plunger starts rattling away agai...

So I’ve finally got round to putting everything together and, hey presto, she’s working perfectly. Dave thank you so much for your help - I’m going to make a donation to the forum now as you suggested...

The 1zp is a much better grinder for your needs and I’d concentrate on that. It will give much better espresso grind as it’s designed for that . Not sure the sage was actually designed 😁🫣😜 Post a p...

Nighttime typo. Absolutely right. If the OP wants to get into the thick of it, just search water and he/she will see my “what water recipe do you use” query, wherein Rob1 and CoyoteOldMan made my head...

https://bellabarista.co.uk/collections/lelit-parts/products/lelit-marax-power-light

it’s unlikely the boiler has run dry if water didn’t escape from it via the hot water tap or from a leak. Are you sure you didn’t knock he valve which switches between tank fed and mains fed, and the ...

Not sure, because generic E61 groups exist, there are many manufacturers and slight variances, usually it’s best to buy group parts from the specific manufacturers. It’s why I like solenoid operated E...

- if it’s a brand new machine, contact the retailer and explain the problem. Tell them about your investigations. They might ask you to take the machine back or, hopefully, they will send you a new va...