LMSC Sorry Dave, I lost you. What’s is this please ? Thx
Firmware on the Evo is upgradeable, if an upgrade is made…this is via a port that’s helpfully on the RHS of the display. This means one cannot remove the lid and simply plug in a USB/C key or adaptor cable!
With a thin RH angle adaptor cable, then one could simply grab the interior end and plug said USB stick into it. I think it’s Micro USB, can’t remember offhand. so something like this
Goodfella A great looking set up. I aspire to that level of order and cleanliness! Maybe once the kids are grown up.
pipedreams86 That’s a beautiful set up.
LMSC Except you have to remove the display to plug it in…then leave it in (for ever) and put display back….
Can’t take any credit for that, Lance Hendrik mentioned it
It’s a hand me down from my grandparents, any drop of water does leave a mark ( hence the table mats on the left) but it wasn’t perfect when I got it. A little oiling helps. Nothing has come out of the bottom, yet!
I was going to install a more kitchen like bar but I really like the look and it works as a coffee/drinks bar.
Cheers
Ross
This was yesterday morning, Sunday, and the photo is of Sunday breakfast in kit-form: croissants ready for warming in the oven, oranges for squeezing in large orange juicer and the coffee ready for the off 😎
Here’s my current set-up, a bit cluttered but not had time to sort it. Ignore the Sage Nespresso machine, it’s only for emergencies 😅. La Pavoni Pro with a temp sensor on group head. Right side is my Frankenstein Mazzer SJ… Removed the doser and changed wiring to make it turn on with the switch. I made the cover and funnel from sheet aluminium and bent it to shape with my hands 💪. There’s a little cap that I pop over the funnel when in use, and I pop it off to get all grounds out. Bellows on top to push everything out to ~0.1g retention.
Hi All,
My setup from Lelit family. Installed the flow control yesterday so a new journey begins.
Tomek
I thought that posting a pic here would be a good motivator for cleaning the setup, so here we are. I am that person to use a stock Mazzer Major at home for single dosing 😱 I am in the honeymoon with that grinder and I’ll probably get a David Wong mod.
i had the wong mod and got rid, i now have the original funnel, and a brush its much easier than the wong kit,
mazzer major is a great grinder if you have the space
Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -
was a bit of a faff, blow here, tap this tap that,
beautifully made product, and well packaged, i just decided id rather use the oe funnel, i now grind, brush and a final puls gets everything out,
i dont drink really dark, but yeah it had been fine for all these, i dont do oily beans though, if i get oily beans i bin them
Decent De1pro v1.45 - Niche Duo - Niche Zero - Decent is the best machine ever made -
Single dosing for Mazzers are a bit annoying with brushing and blowing etc. still good if you have a small budget. The Danial Wong mod was too expensive for me so I just made my own for essentially nothing as I had spare metal lying around. Honestly I would rather just have the Mazzer mini doser funnel thing rather than the other mods, mainly because mods like Danial Wongs are still quite messy. It’s easier to just brush the inside of the funnel and have a clean surface.
