Dual Boiler Machines

Well first thing is take it off the smart plug, in case it’s gone bad (which can happen)…is it still not working?

All very clear now. Thank you for sticking with this in spite of my convoluted posts!

No, I’m in Canada.

@JHCCoffee Confucius did say No, potassium bicarbonate—which is potassium acid carbonate—is not baking soda (sodium bicarbonate). However, potassium bicarbonate can be used as a low-sodium alternative...

You 100% can roast better coffee at home than many commercial roasts for under £20kg a kilo… unless I’ve been living in a dream world for the last 9 months and imagining it. The last greens I bought w...

This was the guide people used. https://support.clivecoffee.com/en/lelit-elizabeth-hot-water-tap-solenoid-cleaning

Manure at 50% off is still just manure, so I’d reckon any amount spent on this will be money flushed away.

The only way to adjust the pressure, really, is by adjusting the expansion valve - which is incredibly easy in this machine. Check pressure with a blind filter - not with coffee. Make sure you secure ...

I know for a fact all the sensors ACS use have a fairly short lead with a connector…you could ask them to measure to see if it will reach…and any espresso parts supplier should measure their sensor le...

I am sorry, I have missed" “Get the right one for your solenoid” part.

- it’s likely your sensor failed, or the he sensor wire has come undone. Did you check that? For what’s worth, I had a similar issue a long time ago with a Profitec machine, 1 year into service. In my...

Thanks Dave!

yes it was leaking from 2 places - from the John Guest fitting on top and from the swivel connection half way down, indeed if you swivel it now you can feel it is not right as the seal has deteriorate...

- buy the machine, use the machine, get to know your machine. Then you think about adjusting things. So no, don’t worry about it.

You’re right, I could do with a spare correct one for the day my old one dies from scale again.

These should be fine just get the right shore hardness, I think shore 70 is often used, although the motor is heavy so perhaps shore 60.

The only issue may be if the Sage is on at the same time as the Profitec as the Sage is 1650W?

I thought ‘if the hose looks in good condition’ would clarify, sorry. It looked quite compressed in two places so I trimmed them off and now it’s fine. I have put it all back together and no more leak...

Welcome to the forum

Definitely not coffee. It is by pixel.