Espresso Machines (inc manual)

I’ve been following this thread since I was having the same issue with pressure overshoot during my shots with my Elizabeth. For me, it was happening on every shot so I decided to open the machine and...

I totally agree. Quite enjoyable to mess around with. It is hard to deny the nice mechanical feel of it all. Satisfying in the same way that driving a proper manual stick shift is. I envision I’ll use...

Sorry, I have no idea. But then again… Without videos or photos it’s hard to picture what the problem really is.

So, on the v2 that is the “exhaust” path from the system once the dump solenoid opens… V1 doesn’t have a dump solenoid so very little water from that outlet. I have had both and been plumbed in on bot...

For some reason you cant from the main page…I changed some things, perhaps it somehow affected that. But if you go into a discussion area, you can create posts. I think I did something funny with tags...

good call, I think it could possibly be where the hose joins the spout, no idea how to get to it from the back though as it’s really quite tight! no leaks underneath the machine, other than when the w...

To close on this. I fixed the issue with the Vac valve not closing. I was not quite as lucky as Paul. I tested the spring like he did in 100 degree C water but it hardly expanded. So I got a new valve...

To be honest, i didn’t notice anything unusual apart from the HW LED flashing. Pretty sure the other (1 and 2) lights were not on (which they are when standby mode is enabled). also, it didn’t happen ...

Started the new year off with the LCC on my Lelit Elizabeth seemingly being off while the rest of the machine seems fine. Can brew, steam etc. just can’t use the LCC at all as its black. Doing some se...

I’ve tried with just the flush lever and the group lever , but didn’t bother to try and compare flow rate changes between them. I can try tomorrow, although I suspect my measurement accuracy may not b...

I have not tried the jugs out. My water is not hard and when I test the hardness it is usually around 15. The Zero was slightly lower but at those levels it is irrelevant

That is an architectural feature BUT you do need more worktop

yes I understand. It was supposed to be an espresso shot and probably looked more like filter 😭 Great set up- thanks for sharing. Might ask for some advise if you don’t mind!

I almost went to sleep happy 🥺

Thanks for the replies but I will buy something from Puly just in case, thanks again

its in the opening menu where you hold buttons and turn on

Emailing Lelit is my next step :) Will report back if they share anything valuable!

Hi, thanks for your help! Based on the info provided and with the right “words” in Google, I’ve found the following video which was very helpful: For me, it turned out that the problem was a ground fa...

I saw, thanks for the donation, I even updated the news ticker. Glad you’re up and running again.

Hi, I have same problem, my leakage is at the top, at the plastic tubing, i tried pfte tape there…I am going to try maybe cutting 4mm off the tubing to get a “cleaner” place for the valve to bite… but...