Espresso Machines (inc manual)

I don’t know the settings having not tested that particular machine…for this you will have to send an e-mail to Lelit support.

https://www.centralcoastcoffee.com.au/products/arkel-espresso-coast-dual-boiler-with-flow-control-espresso-machine?srsltid=AfmBOopw09bvAmvFDXrAnREQHGqccVUJV6hZYlBLtV4BbMJQVAPACeFD Not much but a littl...

I don’t have a lelit bianca so it might have an easier method. But for most machines if you let them heat up fully, then turn them off and open the hot water tap fully (use a jug to catch the water th...

totally forgot about that 🤣

not in the flesh, just a couple of Daves videos on YouTube

What’s an expensive grinder?

It helps when you contact someone who did the top level design for the MK1.

I am also interested to do so. As your message was from two years ago, did you manage to get one? I have a MaraX v2 two and a half years ago and I am more confused than ever regarding the temperature ...

Hi Any e61 portafilter will work but if you want original Lelit I can’t seem to be able to find one easily except for Lelit direct

Open the machine when you can and you should be able to point out where it comes from easily. And yes… that rubber gasket! 🤣🤣🤣🤣🤣🤣

Hi unfortunately no update, no matter what I try the problem remains! Still searching for a fix so if you managed to find one please let me know! And likewise if I find one I will post here.

Yes it was!!! So stupid!!! Thank you so much!

The machine quite often called for water while I was steaming milk.

Trying a new profile It’s not ment to hit 11bars 🤣🤣

Hello opiop. Yes, I got mad with this too but finally found the right tool on Amazon. It is this one: https://www.amazon.com.be/dp/B001550BDK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 size to select is 5...

@vladdooo Jake about summed it up. ☕😎 So the 2 key differences: pre infusion pressure is easier to change and is digital now not using the older mechanical pressurestat. Shot end can be traditional a...

Thanks for your reply Dave. I’m wondering now if it was cracked at the point where the thread ends as I’d just got the thread started when it snapped, no warning at all. But yes they are cheap hopeful...

I’ve been following this thread since I was having the same issue with pressure overshoot during my shots with my Elizabeth. For me, it was happening on every shot so I decided to open the machine and...

I totally agree. Quite enjoyable to mess around with. It is hard to deny the nice mechanical feel of it all. Satisfying in the same way that driving a proper manual stick shift is. I envision I’ll use...

Sorry, I have no idea. But then again… Without videos or photos it’s hard to picture what the problem really is.